The Mavolux 5032 B & C are high precision luxmeter’s that are optimally suited for measuring very high light intensities (brightest daylight, head lights, etc.) without any additional accessories. Each has a USB interface for powering the meter, meter control, and data display/storage using GLUX 2 software (included). The Mavolux 5032 C is typically used in general applications and the Mavolux 5032 B has improved low light sensitivity for certification and inspection applications. The MAVOLUX 5032 B has been approved for certification and official inspection procedures.
Functions and Technical Data
Automatic / Manual Measuring Range Selection
Either Lux or footcandles can be selected as a measurement unit. The measuring range is matched automatically to the measurement value. The current measuring range can be locked by pressing a key, or any one of four or five (MAVOLUX 5032B USB) measuring ranges can be selected manually.
Function "Hold"
The current measurement value can be held at the display by pressing the data hold key.
Function "Mem"
Storage in memory of upto 100 values, read-out in the display or via USB port
Measuring rate
2 measurements per second
Light sensor
Silicon photo diode with V (λ) filter, complies with accuracy class
MAVOLUX 5032 C USB: DIN 5032-7 Class C
MAVOLUX 5032 B USB: DIN 5032-7 Class B
Display |
LCD display |
size 50 mm x 25 mm |
Display/Digit Height |
7 segments characters/13 mm 3 ½ digits |
Overload Display |
"OL" appears in display |
Power Supply |
Battery |
1,5 V alkaline-manganese cell (IEC LR 6), size AA |
Battery Life |
approx. 45 hours continuous operation, When the meter is connected to a PC, power will be supplied by the PC via the USB cable |
Battery test |
symbol is automatically displayed when battery voltage drops below appr.1V |
Battery Saver Circuit
The instrument is automatic ally switched off, if the measurement value remain s unchanged for approximately 4 minutes, and if none of the operating elements has been activated during this time.
Continuous operation
For using the instrument in the continuous operation mode, keep the key HOLD pushed down and then press the key ON/OFF. Pushing the key ON/OFF again will end the operation
Electromagnetic Compatibility EMC
The MAVOLUX meet the Specifications 89/336/EWG dt. 01.01.1996
Mechanical Design Dimensions |
Basic instrument |
65 x 120 x 19 mm |
Sensor |
31 x 105 x 30 mm |
Cable between Instrument and Sensor |
MAVOLUX 5032 C-USB |
coiled cord, permanently attached |
MAVOLUX 5032 B-USB |
plug-in coiled cord. |
Cable Length |
1,5 m; available also in 3 m, 5 m or 10 m – on special order |
Weight |
approx. 200 g without battery |
Standard Equipment
1 Battery 1,5 V
1 Instruction manual
1 USB – Cable
1 CD-ROM with software for processing the values measured
and regulating the m
easuring instrument
1 ever-ready case for luxmeter
Optional Accessories
1 Luminance attachment cd/m² incl. case
1 Luminance attachment fL incl. case
1 Calculator, calculating disc for exposure time/aperture
combinations and additional values for photography
Calibration Certificate – optional at additional price
Calibration reference: Scientific Standard Lamp, type Wi 41 G of the PTB, (Physikalisch Technische Bundesanstalt Braunschweig – National Standards Institute). This Calibration Certificate is necessary for all applications, where measurements, controls and inspections are required by the relevant laws and regulations.
Applications:
- Light technicians
- Control of light sources
- Street lights
- Lighting of work places, public buildings, sports facilities
- Quality control & quality assurance in the manufacture of lamps & light sources
- Light boards / LED billboards
- Light designers and architects
- Measurements in agriculture and horticulture