Molded tab/keyway feature interlocks adjoining elements into larger array.

Sockets provide twin columns of 5-point spring contact clips on each side of a 0.3-inch center channel.

Bus Strips provide twin rows of pre-connected 5-point contact clips.

MOUNTING
Molded-in mounting holes; mount with 4-40 flat head screws from top or 6-32F self-tapping screws from behind

WIRE SIZE
#22 AWG wire preferred; component leads with diameters .01-.033 inches (.25-.84mm) acceptable, .015-.032 inches (.38-.81mm) recommended; prepared wire kit WK-1 is available

HEIGHT
All Quick Test breadboards are 0.33 inches (8mm) high

RESISTANCE
Initial contact resistance is less than 0.5 milliohm, after multiple uses, this reduces to less than 0.4 milliohm