PB-503C Portable Analog & Digital Design Workstation |
Power |
3-wire AC line input (117V, 60 Hz typical) with power-on indicator. Both Models are available in 220-240VAC@50Hz |
Fixed DC output |
[email protected], ripple <5mV. |
Variable DC output |
+1.3 V to [email protected], ripple <5mV. |
Variable DC output |
-1.3V to -15V @ 0.5A, ripple <5mV. |
Frequency Range |
0.1 Hz to 100 kHz in six ranges. |
Output voltage |
0 to ?10V (20Vp-p). |
Output Impedance |
600 ohms (except TTL). |
Output current |
10mA maximum, short circuit protected. |
Output waveforms |
sine, square, triangle, TTL. |
Sine wave |
distortion <3% (10Hz to 100kHz). |
TTL pulse |
rise and fall time <25 nS. drive to 10 TTL loads |
Square wave |
rise and fall time <1.5?S |
Logic Indicators |
8 LED's, active high, 1.4 volt (nominal) threshold, inputs protected to ?20 volts. |
Debounced Push-Button (Pulsers) |
Two pushbutton-operated, open-collector output pulsers, each with one normally-open, one normally closed output. Each output can sink up to 250 mA. |
Potentiometers |
One 1 K ohm, one 10 K ohm, all leads available and uncommitted. |
BNC Connectors |
Two BNC connectors, pin available and uncommitted, shell connected to ground. |
Switches |
Two SPDT slide switches, all leads available and uncommitted. 8-pole DIP switch: one side of all eight switches connected and switchable to +5V or ground, other side of all eight switches separate, available, and uncommitted |
Speaker |
0.25W, 8 ohms |
Breadboarding Area |
Three UBS-100 sockets with 840 tie-points each for a total of 2520 uncommitted tie-points. Two QT-59B Bus strips internally connected to power and ground. Fifty tie-points each for +5V, +V,=15 V and ground. |
Enclosure |
High impact molded case. |
Weight |
7 lbs, 13 oz. |
Overall Dimensions |
with case: 14in H x 19in W x 7in D |
Part Number |
104-5031 |