| Power: |
3-wire AC line input (120 V, 60 Hz typical) with power-on indicator
Available in 220-240 VAC @ 50 Hz |
| Fixed DC Output: |
+5 V @ 1.0 A, ripple <5 mV |
| Variable DC Output: |
+1.3 V to +15 V @ 0.5 A, ripple <5 mV |
| Frequency Range: |
0.1 Hz to 100 kHz in six ranges |
| Output Voltage: |
0 to ±10 V (20 Vpp) |
| Output Impedance: |
600 Ω (except TTL) |
| Output Current: |
10 mA maximum, short circuit protected |
| Output Waveforms: |
Sine, square, triangle |
| Sine Wave: |
Distortion <3% (10 Hz to 100 kHz) |
| TTL Pulse: |
Rise and fall time <25 nS
Drive to 10 TTL loads |
| Square Wave: |
Distortion <3% (10 Hz to 100 kHz) |
| Logic Indicators: |
8 LEDs, active high, 1.4 volt (nominal) threshold, input protected to ±20 volts |
| Debounced Push-Button (Pulsers): |
Two push-button-operated, open-collector output pulsers, each with one normally-open, one normally-closed output. Each output can sink up to 250 mA |
| Potentiometers: |
1 kΩ and 10 kΩ, all leads available and uncommitted |
| BNC Connectors: |
Two BNC connectors, pin available and uncommitted, shell connected to ground |
| Switches: |
Two SPDT slide switches, all leads available and uncommitted
8-pole DIP switch: one side of all eight switches connected and switchable to +5 V or ground, other side of all eight switches separate, available, and uncommitted |
| Speaker: |
0.25 W, 8 Ω |
| Breadboarding Area: |
Three UBS-100 sockets with 840 tie-points each for a total of 2520 uncommitted tie-points
Two QT-59B bus strips internally connected to power and ground
Fifty tie-points each for +5 V, ±1.3 V to ±15 V, and ground |
| Enclosure: |
High-impact molded case |
| Weight: |
7 lbs |
| Overall Dimensions: |
6.5 in H x 16 in W x 11.5 in D |