| General Specifications |
| 2. Coil Construction |
(blank) =Tape-wrapped, Class-B, with 18˝ (45.7cm) lead-wires*
W__ =Tape-wrapped coil, lead-wires, non-standard length
(specify in inches)
1 =Encapsulated coil, Class-B, lead-wires
2 =Molded coil, Class-F, lead-wires
3 =Encapsulated coil, Class-H, lead-wires
4 =Encapsulated coil, Class-B, 3/16˝ (4.76mm) spade terminals
– 1/4˝ (6.35mm) spade optional
10 =Externally rectified coil (lead-wires only)
11 =Tape-wrapped coil, Class-H, lead-wires
HC2 =Encapsulated coil, Class-B, EN175301-803 Style C,
Industrial, 9.4mm, 2+1 poles |
| 3. Body Material (Replaces Standard 303 SS) |
BB =Brass
SB =304 Stainless Steel
SB5 =316 Stainless Steel |
| 4. Diaphragm Seal Material |
(blank) =Viton® diaphragm*
E =EPR diaphragm
NS =Nitrile (NSF/FDA) diaphragm
PF =Perfluoroelastomer diaphragm |
| 5. Body Port Configuration |
(blank) =1/8-27 NPT female thread*
LB =1/4-18 NPT female thread2
BD =#10-32 female straight thread
– max. orifice = 1/8˝ (3.18mm)2
LT =1/8-28 BSPT female thread2
LU =1/4-19 BSPT female thread2
MM =Manifold mount (1/4-28 UNF-2A mounting stud)2†
MM3 =Manifold mount (5/16-24 UNF-2A mounting stud)2†
OB =Omit body (operator style)2
BI =Bottom over-seat port, female thread
– max. orifice = 1/8˝ (3.18mm)2
BIM =Bottom over-seat port, 1/8-27 NPT male thread
– max. orifice = 5/64˝ (1.98mm), brass body only)2
BO =Bottom under-seat port, female thread2
BOM =Bottom under-seat port, 1/8-27 NPT male thread
– max. orifice = 1/8˝ (3.18mm), brass body only)2
RL =90° porting - left hand2
RR =90° porting - right hand2 |
| 6. Voltage |
VDC =DC (specify voltage)
VAC =AC Rectified only (specify voltage) |
| 7. Additional Options |
Y =Yoke
WM =Mounting bracket
OC =Cleaned for oxygen use |
* Standard selection; will be used unless otherwise specified.
Standard selections are not referenced in final part number. |
Notes
1. Use Prefixes from these rows if you want to use any of the other
Body Materials listed under selection 3. Simply add the respective
material code in the 3rd part number position (See Example).
2. Not available with Polypropylene bodies.
† Teflon® o-ring not suitable for manifold mount. |