Fluke T3

Name: Fluke T3
Brand: Fluke
SKU: FlukeT3
Availability: InStock

0 reviews | Model: Fluke T3

Compare

Compact and rugged, easily fits in a tool pouch or overall pocket
LEDs clearly indicate 7 AC and 7 DC nominal voltage levels
Indicates dc voltages as low as 6 volts
DC polarity indicator
Automatically selects continuity beeper or voltage measurement mode
Can stay connected much longer than solenoid type testers
Rugged enough to withstand a 3 meter drop
Protected to 1000 V for use in CAT III environments, and to 600 V for use in CAT IV environments
The Auto-ON light at the top will let you know that it's working and will automatically turn off after approximately eight minutes of inactivity
Heavy-duty test leads for long life

View Product Details

In Stock:

View Payment Options

Recommended for you

The new Fluke T3 is a voltage and continuity tester that is designed to work long and hard. There are no settings, just probe the circuit and the T3 will show you whether you are looking at AC volts, DC volts, or an open circuit. You don't even have to turn it on or off! With seven different voltage indicators, it can clearly differentiate between key voltage levels. All inputs of the T3 are protected to EN61010-1 CAT III 1000V rating.

Voltage LED	On at between 70% and 100% of marked voltage
Continuity threshold	Beeper on at <20,000Ω
Input impedance	750 kΩ nominal
AC frequency response	45 Hz to 66 Hz
Battery	(2) AA Life: 250 hours
Operating temperature	14°F to 122°F (-10°C to 50°C)
Storage temperature	-22°F to 140°F (-30°C to 60°C)
Humidity	0% to 95% - 32°F to 86°F (0°C to 30°C) 0% to 75% - 86°F to 104°F (30°C to 40°C) 0% to 45% - 104°F to 122°F (40°C to 50°C)
Dust/water resistant	IP52 per IEC 529, no vacuum applied
Operating Altitude	approx. 9,800 ft. (3,000 m)
Size	1.3\" H x 1.8\" W x 6.3\" L (3.3cm x 4.6cm x 16cm)
Weight	8 oz. (227 g ) with batteries
Maximum operating voltage	1000 V AC/DC between any terminal and earth ground (protection only)
Voltage rating	Complies with IEC 1010-1 to 1000 V OVERVOLTAGE Category III, Pollution Degree 2, and with IEC 664-1 to 600 V OVERVOLTAGE Category IV, Pollution Degree 2.*
Agency approvals	UL, CSA, CE, VDE (pending)