Stainless Steel RTD Temperature Probe with 4 Banana Plug, 100 Ohm Resistance, -200 to 300 Degree C

Manufactured using a coil suspension element design for increased shock and vibration resistance. Mineral-insulated sheath with a minimum bend radius of 19mm (3/4") for flexibility and durability. 100 ohm nominal resistance. 0.00385 ohm/ohm degree C nominal. Temperature range: -200 to 300 degree C (transition and cable temperature: 0 degree C to 25 percent degree C). Drift rate: + 0.13 degree C at 0 degree C after 1000 hours at 300 degree C. 316 stainless steel sheath material. PTFE-insulated, nickel-plated stranded copper, 22 AWG leads. 4-wire banana termination. Time constant: four seconds maximum for 63.2 degree response to step change in water moving at 3 fps. 19mm (3/4") except for 50mm (2") area of sheath near tip. Calibration Includes manufacturer's NIST-traceable calibration and table with R vs. T values in 1 degree C increments from -196 degree C to 300 degree C. Callendar-van dusen coefficients included. At least 100mm (4") recommended immersion. Accuracy (includes calibration uncertainty and short-term stability): +/-0.50 degree C at -196 degree C, +/-0.050 degree C at 0 degree C, +/-0.052 degree C at 200 degree C, +/-0.055 degree C at 300 degree C. Measures 3/16" diameter by 9" length.