BNC Current Adapter for 17XX Series, 2.8V
The Fluke 17XX-CLAMP-ADPT-2V8 is a BNC adapter designed to allow the connection of current clamps to Fluke’s 17XX series products. The adapter consists of a cable with the plug that fits the 17XX product and a female BNC connecter which allows connection to other current clamps with mV/A outputs. The 17XX-CLAMP-ADPT-2V8 is for use for current clamps with an output maximum value of 2.8V AC/DC. For current clamps with an output of 1V, please see part number 17XX-CLAMP-ADPT-1V.
Please see the following table for details of the supported clamps including ratio settings and the recommended adapter.
| Clamp | Sensitivity | Range | Adapter | Scale Factor | Range |
| i1000s AC | 100 mV/A
10 mV/A
1 mV/A | 0.1A to 10A
0.1A to 100A
1A to 1000A | 1V | 0.01:1
0.1:1
1:1 | Auto |
| i3000s AC | 10 mV/A
1 mV/A
0.1 mV/A | 1A to 30A
1A to 300A
1A to 3000A | 1V | 0.1:1
1:1
10:1 | Auto |
| i310s AC/DC* | 10 mV/A
1 mV/A | 30A
300A | 1V | 0.1:1
1:1 | Auto |
| i400s AC | 10 mV/A
1 mV/A | 0.5A to 40A
5A to 400A | 1V | 0.1:1
1:1 | Auto |
| 80i-110s AC/DC* | 100 mV/A
10 mV/A | 0.1A to 10A
0.1A to 100A | 1V | 0.01:1
0.1:1 | Auto |
| 80i-2010s AC/DC* | 1 mV/A | 2000A | 2.8V | 1:1 | Low |
| i200s AC | 10 mV/A | Up to 200A+10% | 2.8V | 0.1:1 | Low |
| i30s AC/DC* | 100 mV/A | Up to 28A+10% DC | 2.8V | 0.01:1 | Low |
| i5s AC | 400 mV/A | 5A | 2.8V | 0.0025:1 | Low |
*DC is only supported by the 177X PQ Analyzers