General Specifications |
Languages supported in UI |
English (SW v1.0) |
Weight |
1 lbs 6 oz (624g) |
Battery |
Type: Lithium-ion, 3.6 V, 6400 mAh Life: 8 hours typical Charge time: 4.5 hours Charging temperature range: 0 °C to +40 °C |
Power Adapter |
Input: 100 to 240 VAC ą10%, 50/60Hz Output: 15 VDC, 2 A maximum Class II |
Host Interface |
USB type C |
Display |
800 x 480 color capacitive multi-touch |
Dimensions |
8.5 in x 4.5 in |
Operating Temperature |
0°C to 45°C |
Storage Temperature |
-10°C to +60°C |
Operating Relative Humidity |
0 % to 90 %, 0°C to 35°C 0 % to 70 %, 35°C to 45°C |
Operating Altitude |
4,000 m 3,200 m with ac adapter |
Vibration |
Random, 2 g, 5 Hz-500 Hz |
Drop |
1 m drop, 6 sides |
Active Network Diagnostics |
Diagnostic Protocols |
Link Layer Discovery Protocol (LLDP) Cisco Discovery Protocol (CDP) Fast Link Pulses (FLP) |
Nearest Device Diagnostics (If available throughdiagnostic protocols) |
Switch Name Port Number VLAN Name Advertised Data Rates Advertised Duplex |
Power Over Ethernet Compatibility |
IEEE 802.3af/at (SW v1.0) Hardware negotiation with signature resistance Software negotiation withLLDP/CDP |
Power Over Ethernet Diagnostics |
Advertised Power Class (1 to 4) (SW v1.0) Advertised Available Power Powered Pairs Diagnostics forboth Single and Dual signatures |
Power Over Ethernet Measurements |
Loaded Voltage (V) Loaded Power (W) |
Port Blink |
Blink the light of the connected port |
Cable Test Specifications |
Test Port |
Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs |
Commissioning Autotests |
10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only Test Speed: 6 seconds for lengths< 70 m |
Cable Types |
Balanced twisted-pair cabling Unshielded twisted-pair Screened twisted-pair 2-pair and/or 4-pair |
Wire Map-Only Tests |
Document wire map Length of each pair Diagnose split pairs User selectable T568A or T568B User selectable crossover settings(Straight through, Half-crossover, Full-crossover) Test speed: 1 second for lengths < 120 m |
Length (Maximum) |
305 m (1000 ft) |
Nominal Velocity of Propagation (NVP) |
User settable |
Tone Generator |
Generates digital tones compatible with Fluke Networks IntelliTone probe. Generates analogy tones compatible with general analogprobes |
Remote ID Locators |
Use remote ID terminations to identify up to 7 unique ports or office outlets |