Wireless Moisture Sensor

Detachable pin/pinless sensors transmit data to the display that can be viewed from a remote location up to 65ft (20m)

The MO270 detects moisture in wood, particle board, carpeting, and ceiling/bathroom tiles noninvasively (pinless); the MO270 also measures moisture in sheet rock and other building materials using pins that are driven into the material under test. The Sensor unit (transmitter) detaches from the Analyzer unit (receiver) for remote measurement operation. This analyzer is shipped fully tested and calibrated and, with proper use, will provide years of reliable service.

Analyzer Front View

1. Electrode pins and Protective cap with calibration check points
2. Sensor release buttons (one on either side of analyzer)
3. Graphical Display
4. Function buttons (F1, F2, F3)
5. Power button
6. Bluetooth status indicator lamp
7. Navigation (up, down, left, right) and ENTER buttons

Analyzer Side Views

1. Sensor release buttons
2. Ports reserved for future options
3. RJ-45 remote probe port
4. Analyzer (receiver) mini-USB charge-port
5. Mini-SD card slot
6. Sensor (transmitter) mini-USB charge-port

Analyzer Components

1. Cap with built-in calibration check
2. Measurement contact pins
3. Non-Contact capacitive sensor (transmitter)
4. Power button for sensor (used only when sensor is disconnected from receiver)
5. Lithium polymer battery shut-off switch (used only when shipping or transporting the unit)
6. Lithium polymer battery shut-off switch for Analyzer (Receiver)
7. Analyzer (Receiver) unit