• Automatic calculation of differential Temperature (IR - DP) to determine condensation point
• Easy to read, large dual display with automatic backlight feature
• Pinless measurement depth to 0.75"(19mm) below the surface
• Min/Max and Data Hold
• Works on multiple wood types and other building materials

The MO290 is an 8-in-1 meter that combines a Pin/Pinless Moisture Meter with a built-in InfraRed Thermometer. Additional measurements include: Temperature, Humidity, Grains per Pound, Dew Point, Vapor Pressure, and Condensation Point. Monitor moisture in wood and other building materials with virtually no surface damage with the Pinless Moisture sensor (Pin-type Moisture Probe included). Measure Humidity and Air Temperature with built-in probe plus non-contact InfraRed Temperature design.

Patented IR thermometer design locates cold spots on walls, which identifies surfaces subject to condensation (direct differential display of IR - DP)

1. IR temperature sensor

2. Laser pointer

3. Humidity sensor

4. Temperature sensor

5. LCD display

6. Relative Humidity button

7. Mode/Zero Button

8. IR thermometer button

9. Alarm set button

10. Alarm adjust down button

11. ON/OFF power button

12. Remote pin probe input jack (bottom)

13. Battery compartment (rear)

14. Alarm adjust up button

15. Moisture/Relative button

16. Protective cap

1. MIN MAX - Minimum and maximum value

2. HIGH LOW - Alarm limits

3. INT EXT - Internal/External probe

4. mBar - Vapor pressure

5. kPa - Vapor pressure

6. GPP - Grains per Pound

7. g/kg - Grains per kilogram

8. MOIST - Moisture mode

9. RH% - Relative Humidity mode

10. COND - Condensation mode

11. APO - Auto power off

12. DEW - Dew Point temperature

13. C/F - Temperature units

14. - Low battery

15. - Laser pointer On