Recommend to a Friend

Works as advertized

4.0

Manual sensitivity adjustment is a great feature and actually allows quicker and isolation of the breaker you’re trying to find than “automatic learning” types some competitors offer. TIP: read and follow the written directions, and hold the tip of the sensor away from the load side of the breakers and towards the bus bar side when scanning. I found this greatly reduces false signals, even at high sensitivity settings. Then gradually reduce the sensitivity until you’re getting an intermittent chirp and flashing light at one breaker, and not a constant beep and light.

William on Sep 21, 2021 I found this helpful (0)

Recommend to a Friend

Does the job

5.0

It works perfectly, as advertised. Easy to use, but be sure to read the instructions. You need to hold the receiver in the orientation shown in the diagram. On the initial high sensitivity setting it triggers on many circuit breakers, so you have to then slowly reduce the sensitivity until it triggers on only one.

Verified Purchase Derry Kabcenell on Dec 11, 2020 I found this helpful (0)

Recommend to a Friend

Works Well

5.0

This breaker finder works well so far. I should have purchased one years ago! I like that the two parts plug together so they don't get separated in the toolbox.

Verified Purchase Clyde Mustain on Dec 26, 2018 I found this helpful (1)

Recommend to a Friend

good tracer

4.0

I have used these before and bought this to replace another brand. I have had good luck with these. The adjustable sensitivity is a nice feature.

jeff weaver on Apr 22, 2015 I found this helpful (1)

Recommend to a Friend

great

4.0

Big help when working by yourself sets you in the right direction.

Lee on Apr 16, 2015 I found this helpful (1)