Pneumatic Torque Wrench, 6000 ft.lbs, 1 1/2" Square Drive, w/ FRL
PTW-Series Pneumatic Torque Wrenches
Enerpac PTW-Series Pneumatic Torque Wrenches are designed for applications that require speed and control.
The standard package includes a Torque Wrench with a calibration certificate, an FRL (Filter/Regulator/Lubricator), and a 10 ft. (3 m) long, 1/2" (13 mm) diameter air hose, which connects the FRL to the wrench.
Once the air hoses are connected, the operator simply adjusts the air pressure on the FRL to achieve the desired torque using the calibration certificate. After this, the tool is ready to go to work!
The air source used with the PTW system must be regulated and/ or limited to 120 psi (8.3 bar), and must be capable of providing a volume of at least 50 CFM (85 CMH) at 100 psi (6.9 bar). A separate 1/2" (13 mm) hose (not included) must be used to connect the FRL to the air supply.
Productivity
- High speed continuous rotation for constant torque output
- Low friction planetary gearbox design minimizes wear and extends uptime
Safety
- Ergonomic, low vibration design reduces fatigue and the risk of vibration related injuries for the operator
- Low noise air motor provides quiet, consistent performance for indoor and outdoor applications