Yes, the SLB can be used for several supportive duties by using the optional current clamp described below

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Yes, although we always recommend that the SLB be used in offline applications. This is because an offline(disconnected) string prevents the impact of an active external load and protects the string from being overly discharged in the case of an outage event. This could cause system failure and catastrophic damage to the string

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

No problem! All cells and information can be viewed on the LCD screen of any SLB. Test data can be exported via USB flash drive then to PC for report creation

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Please see "How is a discharge test stopped?" for an overview of the safety features

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

The internal storage is 16MB. This generally will hold several tests. The exact amount will vary with different string sizes and discharge durations. We recommend transferring data to the software database after testing

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Testing can be stopped in various ways. The user is able to manually stop the test at any time. The test will auto-shutdown if any of (4) programmable parameters are met. These parameter settings are based on time, capacity, low string voltage, and low cell voltage. Each SLB is further equipped with safety features that will result in test shut down; overload circuit breakers and fused input VAC surge protection

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

The SLB transmits data by RF at the frequency of 433M Hz

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Each SLB comes standard with dataview software. This software allows us to live monitor, view test data, and export reports to Microsoft Excel

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Parallel can be used between to SLB-Series load banks. It allows for a main unit to operate both machines to increase current output

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

The exact power consumption of an SLB varies with model and discharge current, however expect the draw to be less than 9A at max current. A 15A circuit breaker is sufficient for power needs

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

The optional current clamp is used for special testing. Assistive discharge is most common. In this role the SLB is used to add supplemental current to another discharging non-SLB load bank. The SLB will measure the discharge from the external load bank and supply the necessary current to reach max discharge. In an external discharge test the SLB will act in a data logger capacity and record a discharge event. Finally, in charge monitoring the SLB acts in a data collection role to record cell voltages and float charge

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Load testing is the only verifiable method to determine the actual capacity of your battery strings

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous