Toll Free: (877) 571-7901
Local: (732) 728-2590
[email protected]
My Account
Sign in to see your member price, rewards, orders, tracking and more.
Why Join? Gain access to exclusive pricing, rewards and more!
Member Pricing & Rewards active
(877) 571-7901
Member Pricing & Rewards are active.
Accurate measurements without the need to precisely position wire or cable in the center of the jaw clamp.SHOP NOW
The SDS3104XHD features an impressive array of measurement and math capabilities, options for a 50 MHz arbitrary waveform generator, as well as serial decoding. SHOP NOW
The Megger IMT100 is the most versatile multi-tester for PV systems, electric vehicles and industrial applications.SHOP NOW
Similar Items
Let us quote you our best price!
Allow us to earn your business and make this purchase easy.
0 reviews | Model: Eagle Eye ELM-12C
Electrolyte Level Monitoring System: Up to 12 Jars (12 cells)
List Price: $1,194.00
We accept purchase orders and all major credit cards. We also provide financing via Klarna at checkout for qualifying purchases.
Have a question or need to apply for payment terms?
Contact us.
Have a question? Ask an expert.
The Eagle Eye ELM-Series Battery Electrolyte Level Monitor is a reliable dual sensor system that monitors the electrolyte level and temperature of individual flooded batteries. Utilizing low-cost, easy to install sensors, the system will alarm on low electrolyte level or higher than normal temperature. The sensors are simply and securely attached, either directly to the battery jar, or via an optional clip which allows the sensor to be removed and re-used if the cell should require replacement. The ELM-Series battery electrolyte level monitor and sensor is customized to work for any flooded battery system. Each battery system receives (1) ELM-Monitor and the number of sensors per cell. In the condition of a low electrolyte or temperature alarm, the sensors communicate to the system monitor and the system monitor activates a changeover relay output while simultaneously activating the appropriate alarm LED lights. The LED light will indicate either 'low electrolyte level' or 'cell over-temperature'. In the event that four or more cells fall to an alarm level, the monitor will trigger a group alarm in addition to the single cell alarm. The alarm contacts are volt-free and can be made as ‘make-on-alarm’ or ‘fail-safe’ mode (giving warning of a supply failure) and may be linked in to any facilities management or alarm system for remote battery monitoring.
Installation of the ELM sensors is simple and fast. Sensors are daisy chained together via provided, pre-cut ribbon cable. All required materials for installation are provided and do not require modification. Each ELM sensor is installed to front of the battery case via a peel off adhesive. Small marks on the sensor allow it to be easily lined up with the minimum line on the cell/unit for accurate level detection. No marking of the battery jar is required during installation.
Each sensor has (3) LED lights. A green LED will illuminate when there is no fault. Separate red LEDs will illuminate in the event of level or temperature alarm. The LED’s provide quick visual cues to determine the condition of specific cells/units in a string.
The ELM-Series Electrolyte Level Monitor is an easy-to-install battery monitoring solution. The non-invasive system is applicable to any flooded battery system regardless of voltage and amp-hour. The ELM-Series utilizes commonly available cabling between sensors - allowing easy sourcing of additional materials. The battery electrolyte level monitoring system saves time & money by continuously monitoring electrolyte levels and eliminating the need for scheduled periodic testing & maintenance. Markets that use lead-acid batteries have to perform periodic testing to ensure the battery's life. Hydrometers are one of the most common testing methods - but they can be time-consuming and allow possibilities for errors and safety risks. The ELM-Series is a real-time solution for monitoring battery electrolyte and temperature levels - allowing 24/7 protection.
Answers (1) - Asked by Anonymous
I have this question too (0)
The electrolyte level sensor must be mounted vertically in the upright position. It must be flat on the surface of the jar with the "level" line on the sensor in line with the "minimum" line on the jar.
I found this helpful (0)
Inaccurate? (0)
Answered by Anonymous
The electrolyte level monitor uses a high sensitivity temperature IC mounted in the case.
Infrared.
An electrolyte level alarm occurs if low level electrolyte is detected for more than 40 minutes (to prevent spontaneous alarming). When a level alarm is active, it will remain so until the electrolyte level is restored and the R/S button is manually pressed on the sensor. The temperature alarm occurs as soon as the threshold temperature is detected, it will reset automatically after 4 minutes.
The adhesive tape included on the sensors and cradles has been thoroughly tested and will not damage the battery jar.
One Monitor and one sensor would require no more than 0.1 amps at 12 volts.
Power consumption depends on the number of sensors connected and the number of faults detected. The monitor consumes 0.36 watts; a single sensor consumes 0.024 watts with no faults. The total power consumption for common system configurations with no faults would be: • 60-cell system: 0.36W + (60 * 0.024) = 1.44W • 120-cell system: 0.36W + (120 * 0.024) = 2.88W • 240-cell system: 0.36W + (240 * 0.024) = 5.76W The peak power consumption with 4+ Level & Temperature faults would increase the monitor to 1.44W: • 60-cell system: 1.44W + (60 * 0.024) = 2.88W max • 120-cell system: 1.44W + (120 * 0.024) = 4.32W max • 240-cell system: 1.44W + (240 * 0.024) = 7.2W max
The clearances are based on distance above and below the "minimum" line on the battery jar. The sensor frame can be removed to decrease the required clearances. Minimum height without frame: 29 mm (1 1/8th") Typical height with frame: 35 mm (1 3/8th") Minimum depth: 32 mm (1 1/4").
Please select a rating star.
Please complete this field.
Email Adrress is not Valid.
Almost there, please complete all required fields
Out of 5
Average Customer Review
Share your thoughts with other customers