Differential Pressure Gauge, Range 0-0.25" w.c., Velocity 300-2000 FPM
Select the SERIES 2000 Magnehelic® Gage for high accuracy guaranteed within 2% of full scale and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic® gage movement, it quickly indicates low air or non-corrosive gas pressures either positive, negative (vacuum), or differential. The design resists shock, vibration, and over-pressures.
Over-Pressure Protection
Standard Magnehelic® Differential Pressure Gages are rated for a maximum pressure of 15 PSIG and should not be used where that limit could be exceeded. Models employ a rubber plug on the rear which functions as a relief valve by unseating and venting the gage interior when overpressure reaches approximately 25 PSIG (excludes MP and HP models). To provide a free path for pressure relief, there are four spacer pads that maintain .023' clearance when the gauge is surface mounted. Do not obstruct the gap created by these pads.
Product Applications
- Filter Monitoring
- Air Velocity with Dwyer Pitot Tube
- Blower Vacuum Monitoring
- Fan Pressure Indication
- Duct, Room or Building Pressures
- Clean Room Positive Pressure Indication
HP Model
For maximum internal pressures to 80 PSIG on one or both sides of the diaphragm in all standard Magnehelic® ranges. The cover is clear cast acrylic machined to finish dimensions.
MP Model
For maximum internal pressures to 35 PSIG on one or both sides of the diaphragm in all standard Magnehelic® ranges. The cover is clear molded polycarbonate.