| Electrical Measurement and Source |
| Measure mode |
| DC Voltage |
Thermocouple |
Please refer to Thermocouple specification table |
CH1 |
| TC mode -10 to 100 mV |
0.0045 |
0.008 |
0.007 |
0.01 |
0 |
0.0005 |
0.001 |
CH1 |
|
| ± 200 mV |
0.0045 |
0.004 |
0.01 |
0.005 |
0 |
0.0005 |
0.001 |
CH1 |
CH2 |
| ± 2000 mV |
0.004 |
0.003 |
0.0095 |
0.005 |
0 |
0.0005 |
0.01 |
CH1 |
CH2 |
| ± 20 V |
0.0025 |
0.002 |
0.0145 |
0.002 |
0 |
0.0005 |
0.00001 |
CH1 |
CH2 |
| ± 30 V |
0.0035 |
0.0035 |
0.0145 |
0.004 |
0 |
0.0005 |
0.0001 |
CH1 |
CH2 |
| AC Voltage1 |
0 to 2000 mVAC |
0.125 |
0.125 |
0.2 |
0.15 |
0.005 |
0.005 |
0.1 |
CH1 |
|
| 0 to 20 VAC |
0.1255 |
0.125 |
0.2 |
0.15 |
0.005 |
0.005 |
0.001 |
CH1 |
|
| 0 to 300 VAC |
1 |
0.06 |
1.5 |
0.1 |
0.05 |
0.005 |
0.01 |
CH1 |
|
| Current |
± 20 mA |
0.006 |
0.005 |
0.012 |
0.006 |
0 |
0.0005 |
0.0001 |
CH1 |
CH2 |
| ± 55 mA |
0.005 |
0.005 |
0.016 |
0.005 |
0 |
0.0005 |
0.0001 |
CH1 |
CH2 |
Resistance
(True,
4 wire) |
RTD |
Please refer to RTD specification table |
CH1 |
|
| 0 to 400 Ω |
0.0055 |
0.001 |
0.009 |
0.0012 |
0 |
0.0005 |
0.001 |
CH1 |
|
| 0 to 4000 Ω |
0.0055 |
0.001 |
0.009 |
0.0012 |
0 |
0.0005 |
0.01 |
CH1 |
|
Resistance
(4 wire) |
RTD |
Please refer to RTD specification table |
CH1 |
|
| 0 to 400 Ω |
0.012 |
0.005 |
0.015 |
0.006 |
0 |
0.001 |
0.001 |
CH1 |
|
| 0 to 4000 Ω |
0.0115 |
0.0045 |
0.015 |
0.006 |
0 |
0.001 |
0.01 |
CH1 |
|
| Frequency |
0 to 1000 Hz |
0.0003 |
0.0002 |
0.003 |
0.0002 |
|
|
0.0001 |
CH1 |
|
| 1 kHz to 50 kHz |
0.0003 |
0.0004 |
0.003 |
0.0004 |
|
|
0.00001 |
CH1 |
|
| 0 to 999999 CPM |
Refer to range table above for equivalent frequency |
CH1 |
|
| 0 to 999999 CPH |
Refer to range table above for equivalent frequency |
CH1 |
|
| Totalizing counter |
Maximum count 9999999 |
CH1 |
|
| Trigger level |
Automatic or manual setting 0 to 20 V |
CH1 |
|
| Pressure |
25 mbar to 1000 bar
(0.35 psi to 15000 psi) |
Please refer to PM 620 pressure range table |
P1 |
P2 |
| IDOS external module |
Please refer to IDOS UPM datasheet. Cable P/N IO620-IDOS-USB+IO620-USB-PC required |
IDOS |
|
| USB port |
Please refer to GE Measurement & Control for compatible devices |
USB |
|
| Source mode |
| DC Voltage |
TC mode |
Please refer to Thermocouple specification table |
| TC mode -10 to 100 mV |
0.009 |
0.008 |
0.014 |
0.01 |
0 |
0.0005 |
0.001 |
CH1 |
|
| 0 to 200 mV |
0.0045 |
0.004 |
0.01 |
0.005 |
0 |
0.0005 |
0.1 |
CH1 |
|
| 0 to 2000 mV |
0.004 |
0.003 |
0.009 |
0.005 |
0 |
0.0005 |
0.1 |
CH1 |
|
| 0 to 20 V (3 mA max) |
0.006 |
0.002 |
0.0145 |
0.002 |
0 |
0.0005 |
0.001 |
CH1 |
|
| Current |
0 to 24 mA |
0.01 |
0.004 |
0.015 |
0.005 |
0 |
0.0005 |
0.001 |
CH1 |
CH2 |
0 to 24 mA (Internal loop
power) |
0.01 |
0.004 |
0.015 |
0.005 |
0 |
0.0005 |
0.001 |
|
CH1 |
| Resistance |
RTD |
Please refer to RTD specification table |
|
|
| 0 to 400 Ω (0.1mA) |
0.024 |
0.0035 |
0.03 |
0.0075 |
0 |
0.001 |
0.01 |
CH1 |
|
| 0 to 400 Ω (0.5mA) |
0.004 |
0.0025 |
0.008 |
0.003 |
0 |
0.001 |
0.01 |
CH1 |
|
| 400 to 2000 Ω (0.05mA) |
0.048 |
0.0035 |
0.06 |
0.006 |
0 |
0.001 |
0.01 |
CH1 |
|
| 2k to 4 kΩ (0.05mA) |
0.048 |
0.0035 |
0.06 |
0.0045 |
0 |
0.001 |
0.01 |
CH1 |
|
| Maximum input current |
0-400 Ω 5 mA, 400-2000 Ω 1mA, 2000-4000 Ω 0.5 mA |
| Frequency |
0 to 1000 Hz |
0.0003 |
0.00023 |
0.003 |
0.00023 |
|
|
0.1 |
CH1 |
|
| 1 kHz to 50 kHz |
0.0003 |
0.000074 |
0.003 |
0.000074 |
|
|
0.001 |
CH1 |
|
| Output waveform |
Square, positive swing up to 20V (adjustable), negative swing -120mV (fixed)
Sine and Triangular, adjustable amplitude and offset within the limits -2.5 to +20 V |
|
|
|
| Square wave peak output |
0 to 20V +/-20mV (3 mA maximum) |
|
|
|
| 0 to 99999 CPM |
Please refer to range table above for equivalent frequency |
1 |
CH1 |
|
| 0 to 99999 CPH |
Please refer to range table above for equivalent frequency |
1 |
CH1 |
|
| Totalizing counter |
Maximum count 1000000. Rate 1 to 50,000 pulses/sec |
1 |
CH1 |
|
Notes:
1. Specification applies, 45 to 65Hz and between 10% and 100% of full scale.
2. Specification applies when calibration temperature is between 10 and 30°C
3. Total uncertainty includes reference standard uncertainty, NLH&R and typical long term stability for one year (K=2).
Multiple parameter display capability
The display can be configured to show a maximum of 6 simultaneous reading windows as follows: CH1, CH2, P1, P2, IDOS, HART |