The item on this page is a product selection tool for hydraulic versions of the DPI610E. These are the DPI610E-HC and DPI610E-SHC. For pneumatic models, please see the other product selection tool on this page.

The DPI610E handheld pressure calibrator is the latest and the sixth generation of the DPI600 family.

The DPI610E combines effortless pressure measurement and generation, signal measurement and loop power with significantly improved pump capabilities and a powerful touch and button user interface.

With a robust design, the unit has been engineered for instrument technicians, using input from those working in the field. It is an ideal solution to your test and calibration application.

Pressure accuracy

By continuing to use Druck’s in-house sensor technology, the DPI610E provides highly accurate, reliable, and stable pressure measurement. Total 1 year uncertainty down to 0.025% Full Scale (FS) over a temperature range of -10°C to +50°C gives you complete confidence in the measurement accuracy between annual calibrations.

The DPI610E provides a tool-less quick-fit connection where finger-tight connections achieve pressure-tight connections at up to 1000 bar.

The innovative design of the DPI610E pressure generation system provides significantly easier and more efficient pressure generation and precise control using carefully selected components.

With the improved pressure generation capabilities, the DPI610E provides higher pressures and higher volume handling with market leading pneumatic pressures from 95% vacuum to 35 bar/500 psi/3.5 MPa. A simple selector lets you switch from vacuum to pressure and with a few strokes of the pump, you can generate the required pressure. Fine adjustments can be made with the built-in volume adjuster and falling pressure calibration points are achieved with the precision-control vent valve.

The pneumatic version has a supplied dirt trap to prevent contamination of both the instrument itself and the system under test from dirt and debris as well as moisture.

Pneumatic pressure generation range is -0.95 to 35 bar/ 500 psi/3.5 Mpa (gauge).

An internal Pressure Relief Valve vents safely inside the case to protect the internal pressure sensor. The relief pressure is factory set to be appropriate to the sensor/pressure range ordered.

The hydraulic version has an external 100cc reservoir for easy visibility of hydraulic oil or water, a priming pump to expel air from the connected system and an intensifier to quickly and easily generate pressure up to 1000 bar/15000 psi/100 MPa.

• The hydraulic pressure generation range is up to 1000 bar/15000 psi/ 100 Mpa (absolute).
• An internal Pressure Relief Valve vents safely back to the reservoir to protect the internal pressure sensor. The relief pressure is factory set to be appropriate to the sensor/pressure range ordered.

The DPI610E is a configurable product with several options available.

First, there are four main models:

• DPI610E-PC: pneumatic safe area
• DPI610E-HC: hydraulic safe area
• DPI610E-SPC: pneumatic hazardous area
• DPI610E-SHC: hydraulic hazardous area

Pressure ranges are from 5 to 15000 PSI with choices for gauge and absolute pressure.

Please refer to pages 9 and 10 of this document for a complete breakdown of part number construction, options, specifications and more.

The DPI610E user interface can be fully driven from either the touchscreen or via push buttons to allow use with or without gloves.

• The DASHBOARD allows quick application selection without the need for menus or special keys.
• The TASK menu provides a library of popular configurations. From the dashboard screen, three clicks completely reconfigure the DPI610E for the next job.
• From the FAVORITES menu, it’s even quicker to access regularly used and customized TASKS.
• Electrical connection diagrams can be viewed on screen

The display can be configured to show up to four simultaneous measurement readings in the channel windows.