12-pin Test Point Header
The PmodTPH2 is a 12 point test header, giving users easy access to any signals passing through the Pmod.
Functional Description
Offering 12 isolated pass through connectors, this module is able to easily able to be placed between two pieces of hardware allowing the user to observe and debug their circuit.
Interfacing with the Pmod
Attach your multimeter or oscilliscope (such as the Analog Discovery) to the vertical test point headers and measure away!
| Header J1 | Header J1 | Header J1 |
| Pin | Signal | Description |
| 1 | 1 | Pass through #1 |
| 2 | 2 | Pass through #2 |
| 3 | 3 | Pass through #3 |
| 4 | 4 | Pass through #4 |
| 5 | 5 | Pass through #5 |
| 6 | 6 | Pass through #6 |
| 7 | 7 | Pass through #7 |
| 8 | 8 | Pass through #8 |
| 9 | 9 | Pass through #9 |
| 10 | 10 | Pass through #10 |
| 11 | 11 | Pass through #11 |
| 12 | 12 | Pass through #12 |
Any external power applied to the PmodTPH2 must be able to be handled by your two pieces of hardware on either side of the Pmod.
Physical Dimensions
The pins on the pin header are spaced 100 mil apart. The PCB is 2 inches long on the sides parallel to the pins on the pin header and 0.8 inches long on the sides perpendicular to the pin header.