R/C Servo Connectors
The Digilent PmodCON3 can be used to easily interface with up to four small servo motors that deliver anywhere from 50 to 300 ounces/inches of torque, such as those used in radio-controlled airplanes or cars, as well as some mechatronics projects.
Functional Description
The PmodCON3 allows any Digilent system board to easily interface with a standard 3-wire servo motor consisting of a signal, positive power supply, and ground power supply wires. The power supply can be sourced either from the system board or an external power source via screw terminals by selecting the appropriate setting on the jumper block.
Physical Dimensions
The pins on the pin header are spaced 100 mil apart. The PCB is 1.0 inches long on the sides parallel to the pins on the pin header and 0.8 inches long on the sides perpendicular to the pin header.