Solid State Relay Electronic Switch
The Pmod SSR is a solid-state relay that features IXYS' CPC1908J. The Pmod SSR uses a switch controlled by a single GPIO pin and is rated to block up to 48 Volts and switch up to 6 Amps (rms) continuous current.
Functional Description
The Pmod SSR uses a single GPIO pin to establish a connection between two terminals.
Interfacing with the Pmod
The Pmod SSR communicates with the host board via a GPIO pin. To open the relay, the ON pin must be driven to a logic high state. To close the relay, the ON pin must be driven to a logic low state.
Physical Dimensions
The pins on the pin header are spaced 100 mil apart. The PCB is 1.7 inches long on the sides parallel to the pins on the pin header and 0.8 inches long on the sides perpendicular to the pin header.