All-In-One 1GS/s 100MHz Mixed Signal Oscilloscope, Function Generator, Power Supply, and DMM
What is the ADP5250?
Bolster your benchtop with the biggest, baddest, and boldest Analog Discovery yet.
The ADP5250 brings higher sample rate and bandwidth and a more rugged design to the Analog Discovery Pro family, keeping our free highly rated WaveForms application software at the controls.
Higher Sample Rate and Bandwidth
Designed to combine a complete set of instruments into a flexible and programmable device, the ADP5250 features a mixed-signal oscilloscope with two 100 MHz bandwidth, 1 GS/s analog channels, 34 digital channels, a tri-output power supply capable of up to 25 V, an external trigger, Waveform Generator, and a built-in programmable DMM. This is our first instrument with full DMM capabilities including true current and resistance measurement and a 300 V input range.
The Ultimate All-In-One Test System
Analog Discovery Pro devices feature a variety of advanced triggering options. Instruments within WaveForms can be cross-triggered, for example, by activating an oscilloscope capture based on a received and decoded digital protocol. In addition, external signals can trigger events using the dedicated external trigger input/output. Our free WaveForms software provides these features configurable in the instruments themselves, or for more control or automation in one of the available scripting interfaces.
Analog Inputs:
- Used in the Oscilloscope, Network Analyzer, Spectrum Analyzer, and Impedance Analyzer
- Two analog input channels accessible via front panel BNC connectors
- Channel type: single ended
- Analog bandwidth: 100 MHz @ -3 dB
- 8-bit resolution
- Max sampling rate: 1 GS/s single channel
- Maximum input range: 40 V peak to peak
- AC or DC coupling
- Maximum record length: 1 MS per channel
Analog Outputs:
- One channel accessible via a front panel BNC connector
- 14-bit resolution
- AC amplitude (max): ±12 V
- Maximum analog bandwidth: 5 MHz @ -3 dB
- Maximum sampling rate: 125 MS/s
Power Supplies:
- Digital supply: 3.3 V, 20 mA
- DC power supplies:
- 0 to 6 V variable, 1 A max current
- 0 to 25 V variable, 500 mA max current (isolated)
- 0 to -25 V variable, 500 mA max current (isolated)
Digital Multimeter:
- Used in the DMM instrument
- Functions: DC voltage, AC voltage, DC current, AC current, resistance, diode, continuity
- Resolution: 5 1/2 digits
- Sample rate 5 S/s
- Input protection:
- Resistance, diode: up to 300 V DC
- DC and AC voltage: up to 300 V DC or 265 VAC (rms) 400 V AC (peak)
- DMM A current connector fuse: internal ceramic fuse, 10 A 250 V, time-delay, 5 x 20 mm, T 10 A H 250 V
- DMM mA current connector fuse: internal ceramic fuse, 1.25 A 250 V, time-delay, 5 x 20 mm, T 1.25 A H 250 V
- Maximum common-mode voltage: 300 V DC or AC (rms)
Digital Inputs:
- Used in the Logic Analyzer
- Channels: 34
- Input voltage: 0 V to 5 V
- Input threshold: 0 V to 2 V
- Max sampling rate: 1 GS/s
- Typical record length: 1 MS
Advanced Triggering:
Trigger sources: oscilloscope analog channels, function generator start, digital inputs, digital I/O, power line frequency, external trigger
- Trigger modes
- Normal, auto, force, single
- Analog trigger
- Digital trigger
- Edge, level, pattern, glitch
- External trigger:
- 5 V compatible TTL input or 3.3V LVTTL output
- 4 mA drive strength