All-In-One 1GS/s 100MHz Mixed Signal Oscilloscope, Function Generator, Power Supply, and DMM - Bundle
What is the ADP5250?
Bolster your benchtop with the biggest, baddest, and boldest Analog Discovery yet.
The ADP5250 brings higher sample rate and bandwidth and a more rugged design to the Analog Discovery Pro family, keeping our free highly rated WaveForms application software at the controls.
Higher Sample Rate and Bandwidth
Designed to combine a complete set of instruments into a flexible and programmable device, the ADP5250 features a mixed-signal oscilloscope with two 100 MHz bandwidth, 1 GS/s analog channels, 34 digital channels, a tri-output power supply capable of up to 25 V, an external trigger, Waveform Generator, and a built-in programmable DMM. This is our first instrument with full DMM capabilities including true current and resistance measurement and a 300 V input range.
The Ultimate All-In-One Test System
Analog Discovery Pro devices feature a variety of advanced triggering options. Instruments within WaveForms can be cross-triggered, for example, by activating an oscilloscope capture based on a received and decoded digital protocol. In addition, external signals can trigger events using the dedicated external trigger input/output. Our free WaveForms software provides these features configurable in the instruments themselves, or for more control or automation in one of the available scripting interfaces.
Analog Inputs:
- Used in the Oscilloscope, Network Analyzer, Spectrum Analyzer, and Impedance Analyzer
- Two analog input channels accessible via front panel BNC connectors
- Channel type: single ended
- Analog bandwidth: 100 MHz @ -3 dB
- 8-bit resolution
- Max sampling rate: 1 GS/s single channel
- Maximum input range: 40 V peak to peak
- AC or DC coupling
- Maximum record length: 1 MS per channel
Analog Outputs:
- Used in the Waveform Generator, Impedance Analyzer, and Network Analyzer
- One channel accessible via a front panel BNC connector
- 14-bit resolution
- AC amplitude (max): ±12 V
- Maximum analog bandwidth: 5 MHz @ -3 dB
- Maximum sampling rate: 125 MS/s
Power Supplies:
- Digital supply: 3.3 V, 20 mA
- DC power supplies:
- 0 to 6 V variable, 1 A max current
- 0 to 25 V variable, 500 mA max current (isolated)
- 0 to -25 V variable, 500 mA max current (isolated)
Digital Multimeter:
- Used in the DMM instrument
- Functions: DC voltage, AC voltage, DC current, AC current, resistance, diode, continuity
- Resolution: 5 1/2 digits
- Sample rate 5 S/s
- Input protection:
- Resistance, diode: up to 300 V DC
- DC and AC voltage: up to 300 V DC or 265 VAC (rms) 400 V AC (peak)
- DMM A current connector fuse: internal ceramic fuse, 10 A 250 V, time-delay, 5 x 20 mm, T 10 A H 250 V
- DMM mA current connector fuse: internal ceramic fuse, 1.25 A 250 V, time-delay, 5 x 20 mm, T 1.25 A H 250 V
- Maximum common-mode voltage: 300 V DC or AC (rms)
Digital Inputs:
- Used in the Logic Analyzer
- Channels: 34
- Input voltage: 0 V to 5 V
- Input threshold: 0 V to 2 V
- Max sampling rate: 1 GS/s
- Typical record length: 1 MS
Advanced Triggering:
Trigger sources: oscilloscope analog channels, function generator start, digital inputs, digital I/O, power line frequency, external trigger
- Trigger modes
- Normal, auto, force, single
- Analog trigger
- Digital trigger
- Edge, level, pattern, glitch
- External trigger:
- 5 V compatible TTL input or 3.3V LVTTL output
- 4 mA drive strength