The Desco Metal-Out Shielding Bags are integral antistatic and low tribocharging bags which will not electrostatically charge contents during movement. Bags have a protective coated aluminum metal outer layer of laminated film; this promotes a more rapid discharge of static fields creating the event which the metal layer then attenuates. If RF field sensitivity is an issue, metal-out bags may be unsuitable. The rapid discharge to the highly conductive outer layer can create a higher radiated field which in return can cause issues for objects inside or near the bag. Available with and without dissipative zipper. 100 bags per Pack.

• Surface Resistance (Exterior): 1 x 10E4 to < 1 x 10E8 Ohms (per ANSI/ESD STM11.11)
• Surface Resistance (Interior): 1 x 10E4 to < 1 x 10E11 Ohms (per ANSI/ESD STM11.11)
• ANSI/ESD S11.4 Level: Level 3
• Discharge Shielding Energy Test: < 20nJ
• Thickness: 0.0030in (0.0762mm)
• Aluminum shielding layer of laminated film
• 40% light transmission for identification of contents
• Integral static dissipative properties – not topically treated, not humidity dependent
• Large 3/8in wide weld seals for increased strength, higher quality, durability
• ESD Protective Symbol as required by ANSI/ESD S541 with lot code number
• OpenTop or ZipTop available

NOTE:

ANSI/ESD S541 Section 6.2 Outside an EPA

“Transportation of sensitive products outside of an EPA shall require packaging that provides: (1) Low charge generation (2) Dissipative or conductive materials for intimate contact (3) A structure that provides electrostatic discharge shielding.”