• Anti-static shielding grid tape
• Low charging transparent cellulose film with high tack rubber adhesive
• Conductive shielding layer (1 x 10⁴ to < 1 x 10⁶ ohms) with ESD Symbols (MIL STD 1285 and ESDA)
• Creates a Faraday Cage to provide static shielding of an ESD sensitive item
• Surface Resistance 1 x 10⁸ to < 1 x 10¹¹ ohms

Desco’s Wescorp anti-static shielding grid tape comes on a paper core and is available in several widths.

This tape has a conductive shielding layer (1 x 10⁴ to < 1 x 10⁶ ohms) with ESD Symbols (MIL STD 1285 and ESDA) and creates a Faraday Cage to provide static shielding of an ESD sensitive item. Surface resistance is 1 x 10⁸ to < 1 x 10¹¹ ohms and is tested per ANSI/ESD S11.11 to meet the dissipative limits of packaging standard ANSI/ESD S541.

These tapes contain a low charging, transparent cellulose film with high tack rubber adhesive. Wescorp tape generates less than 50 volts when unwound from roll (at 73°F, 45% RH average) making it safe to use around most ESD sensitive items.

All tapes will generate some amount of triboelectric charge when unwound from roll. Standard, non-ESD tapes typically generate more than 1000 volts when unwound from roll. If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape. Please see the accessories section of this page for the Desco 81282 tape dispenser.

Additional Features:

• Tested per ANSI/ESD S11.11 to meet dissipative limits of packaging standard ANSI/ESD S541.
• Temperature Range 10°C - 71°C (14°F - 140°F)
• Meets MIL-B-81705 for exposure to 100°C for 10 minutes max
• Lead-Free RoHS Compliant