• Two fans overhead ionizer
• Neutralizes electrostatic charges on insulators and ungrounded conductors in a 2’ x 4’ coverage area
• Fast decay times (< 3 seconds at 18”)
• Discharges (removes) both positive and negative electrostatic charges within the coverage area
• ±3 volt offset voltage balance

The Overhead Zero Volt Ionizer (ZVI) is a steady-state DC auto-balancing ionizer with integrated closed-loop feedback. It combines the effectiveness of steady-state DC ionization with ease of adjustability, communication capability and the flexibility of a microcontroller-based design to produce a versatile and stable ionization system. Its fans produce extended ionization coverage and are ideal for areas where bench space is limited.

The Overhead Zero Volt Ionizer uses steady-state DC ionization. Steady State DC systems consist of separate negative and positive ion emitters connected by a pair of high-voltage cables to their respective high-voltage power supplies. The spacing between emitters varies depending on the design, and DC power is constantly applied to the emitter points. The ionizer utilizes feedback from the internal sensor grill to continuously adjust the output to maintain balance.

A. Mounting Bracket: Attach the included hanging kit to these brackets to install the ionizer.

B. Power Cord Inlet: Connect the power cord here to provide power to the ionizer.

C. Key Switch: Use the included keys to turn the ionizer ON or OFF.

D. RS-485 OUT: For manufacturer use only.

E. RS-485 IN: For manufacturer use only.

F. LED Display: Displays the ionizer address, balance, fan speed, and maintenance codes.

G. Control Buttons: Use the buttons to modify the ionizer’s settings.