• Sold in pairs
• 14-inch length
• Dissipative polyester material with Nomex lining
• Protects the operator’s hands when handling products up to 200°F
• 4mm grounding snap

Desco 14 inch hot process gloves are made of dissipative polyester material with Nomex lining and protect the operator’s hands up to 200°F. They are non-scratch, touchscreen compatible, and allow the wearer to operate touchscreen monitors and other devices.

These gloves feature a 4mm grounding snap which can be used with a coil cord to form a path to the ground for the operator. Compatible with wrist strap touch testers and continuous monitors. They electrically bond through a grounded operator and limit charge generation and ESD events. Resistance to Ground < 1 x 10⁷ ohms Rgp Tested Per ESD SP15.1.

Additional Features:

• Non-scratch touchscreen compatible
• Electrically bonds through grounded operator and limits charge generation and ESD events
• Resistance to Ground < 1 x 10⁷ ohms Rgp Tested Per ESD SP15.1
• Use with a coil cord to form a path to the ground for the operator
• Compatible with wrist strap touch testers and continuous monitors

A. 0.160" (4mm) stud to fit 1/8" (4mm) spring-loaded medical snap.*

B. Exterior fabric is 97.9% textured polyester. Conductive fiber filament (Rgp

< 1 x 10⁷ ohms) made of carbon suffused nylon 6 monofilament spaced every

0.25 inches. Material will not slough and can be precision cleaned for use in

cleanrooms down to class 100.

Can be washed multiple times in a mild detergent**.

C. Inner lining constructed of Nomex® makes gloves ideal for use in any process

involving heat up to 200°F (93.3°C).

D. Conductive, color-coded cuff (see chart below) interconnects with the

conductive fiber and snap providing a true and rapid ground path.

E. Measures around the hand at the fullest part (excluding thumb)

F. Measures from the tip of the middle finger to the base of the hand

Unless otherwise noted, tolerance ± 1/2"