FixQuick is the new ultra-fast leak stop, specifically formulated to repair in max 30 seconds leaks up to 1 mm in diameter on flat and curved surfaces. It guarantees a seal up to 50 Bar (725 PSI) pressure and 250°C (480° F). It can be used on metals and plastic components of AC/R systems. Its fluorescent formulation allows to easily check the status of the performed fixing using a UV lamp and to identify any previous repairs.

Use Instructions

1. Apply the product on a surface perfectly dry and clean. It is recommended to clean the area with sandpaper Remove any residuals that could affect FixQuick performance

2. Apply the STEP 1 liquid product on the leaking area and the around surface without pressure

3. Apply the STEP 2 powder on the surface just treated creating a thin layer

4. Apply once again the STEP 1 liquid product to obtain a homogeneous reparation

5. Wait 20 seconds for a repair that can withstand a pressure of 20 Bar (290 Psi) and 20 min (at standard room-temperature of 20°C) to withstand a pressure of 50 Bar (725 Psi) and 480°F.