The PT-600 is designed to perform the 60 Hz power line cross test/AC power fault tests required in BELCORE 1089, UL 1950 and ITU-T Standards for telecommunications equipment.
Tests conducted by the Base Models are:
UL 1950 Annex NAC:
-
All M-Tests.
-
(2-channel PT-600's only) All M-, L- and F-Tests except Test L5.
BELCORE GR-1089 (Model PT-600-480-2-60 only):
-
Table 4-7, First-level AC power Fault Test; Tests 1, 2, 3, 6 & 7.
-
Table 4-8 Second-level AC Power Fault Test; Tests 2, 3 & 4 (except note 8).
Optional Tests:
UL 1950 Annex NAC:
-
Test L5.
BELCORE GR-1089 (Model PT-600-480-2-60 only):
-
Clause 4.5.11
-
Clause 4.5.14
-
Clause 4.5.15.1, condition 1 and condition 2.
-
Clause 4.5.16
-
Table 4-7, Tests 4, 5, 8 & 9.
-
Table 4-8, Tests 1, 4 (note 8) & 5.
ITU-T Tests (Model PT-600-480-2-60 only):
-
Power Induction and Earth Potential Rise.
Models are available in single or dual channel for 2 and 4 wire testing, and with channel outputs of 40 amps for UL Testing, or 60 amps for BELCORE testing, per channel output. Single and dual channel versions are available.
The PT-600 has easy to use controls and output terminals making test set up simple and efficient. The Preset and Adjustable Time Settings and the Preset and Variable Resistors provide for versatility in performing a wide variety of tests.
Measuring Terminals including Voltage Sense and Current Shunt portals provide a safe location for users to accurately measure test voltages and output current while setting up tests. 5-way output terminals are available for the various source impedance requirements making test set up straightforward and hassle-free. The PT-600 has many safety features: front and rear door interlock switches, emergency stop, and fuse protected output terminals for added safety.
Calibration of the PT-600 is designed to be performed with a simple handheld multi-meter and the removable Currents Shunts can be easily sent to a calibration laboratory if required.