| Specifications |
| Voltage Test Type |
AC |
| Output Voltage |
0 - 10,000VAC |
| Leakage Current Adjustment |
1 - 20 mA AC, increments of 0.1 mA |
| Input Voltage |
120 V *different line voltages available |
| Frequency |
50/60 Hz |
| Fuse |
250 VAC 2 A Slow Blow |
| Breakdown Detect |
Independent High Frequency Circuit |
| Transformer Power |
< 500 VAC |
| Leakage Current Detect |
Independent Low Frequency Circuit |
| Test Time Range |
1 - 60 seconds |
| Displays |
4 Digits LED Display (Voltage), 3 Digits LED Display (Current) |
| Voltage Meter Accuracy |
± 2 % |
| Current Meter Accuracy |
± 0.1 mA from 1 – 17mA ± 0.2 mA from 17 – 20mA |
| Duty Cycle |
100 % |
| Operation Temperature |
15 - 40 °C |
| Relative Humidity Range |
0 - 90 % Non-Condensing |
| General |
| Dimensions |
17” Wide x 6” High x 17” Deep |
| Weight |
32 lbs |
| Product Package |
HT-10KVPac 20mA -HT-10KVPac 20mA Product Manual-18 AWG Test Lead (Black)-18 AWG High Voltage Test Lead (Red)-NIST Traceable Calibration Certificate to ANSI Z540 |
| Options |
| (xxx) Different Line Voltages |
Replace on the part number xxx-for 100, 110, 220, 230 or 240 depending the-line voltage. (120V for standard configuration). |
| (XI) Safety Interlock |
Two position terminal block on rear panel-must be shorted for high voltage operation. |
| (VF) Voltage on Failure |
If failure as Excess Leakage or Hipot-Fail happens, it will terminate the test and-the front voltage display-will hold the last voltage reading. |
| (AR) Auto Reset on Pass |
Resets the tester after a few seconds only on passing test condition. |
| (ZOS) Zero Voltage Start |
Voltage adjust knob must be to minimum position to allow start the test cycle.(RI) Relay Isolated Remote |
| Interface |
It allows the interface with a PLC or other machine using relay closures. This option allows isolation between the PLC and the Hipot tester. |
| Safety |
| Visual Indicator of Voltage |
Provided by front panel meter, directly connected to high voltage output. |
| Output |
| Failure Indicator |
Audible, provided by buzzer.-isual, Provided by red LED's.-Test automatically terminated on failure. |
| Leakage Test |
Provided, 1 mA AC factory set pass/fail point, user adjustable. |