Compliance Defib Surge P 380 - EN45502-2-2 Sec. 20, External Defib Protection Test 1

Name: Compliance Defib Surge P 380 - EN45502-2-2 Sec. 20, External Defib Protection Test 1
Brand: Compliance West
SKU: ComplianceDefib Surge P 380
Availability: InStock

0 reviews | Catalog: 00-MPDefib Surge P 380 | Model: Compliance West Defib Surge P 380

Compare

Surge Tester Defib Surge P 380, EN45502-2-2 Fig. 107 / Fig. 110: 380V

Up to 380V test Voltage
Designed with operator safety in mind: Set up the EUT to the right and behind the tester, and a right-handed operator will find himself standing to the left of the tester, allowing maximum separation
Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse Defib Surge P, allowing easy sanity checks and proof to visiting agency engineers of test setups
Microcontroller technologies, front panel voltage meter indicates test peak open circuit voltage and polarity
Reverse polarity waveforms available by pushing a button on the front panel. No need to change the test setup. Positive polarity indication minimizes errors
Front panel voltage meter shows residual voltage in charging circuit for safer operation
1-year calibration cycle
All test leads included
1 year warranty

View Product Details

In Stock:

View Payment Options

Call Us

Request Quote

Non-Cancellable / Non-Returnable

Recommended for you

Compliance Defib Surge P 380

Up to 380V test Voltage
Designed with operator safety in mind
Theoretical graphs and actual graphs showing the output of your tester
Microcontroller technologies, front panel voltage meter
Reverse polarity waveforms available

EN45502-2-2 Sec. 20, External Defib Protection Test 1

A Compliance West surge Tester. That means it outputs a guaranteed waveform but won't break the bank. The tester outputs the waveform it is supposed to, time after time.

Built in the USA. Email and phone support are free for life. Reasonable repair and calibration charges. Timely and helpful customer service always.

The Defib Surge P 380 outputs the pulse shown in EN45502-2-2 Fig. 107; with a Tp of 1.5 – 2.5ms; and a Tw50 of 3 - 5.5ms when discharged into the resistor network shown in Fig. 110. For tester protection, Fig. 110’s R7 and R1 are supplied internally. In accordance with the standard, the Megapulse Defib Surge P 380 can recharge and trigger the next pulse within 20 seconds.

Options:

Option RI: PLC Interface Board
Option TMM: TestMINDER automation software
Option XI: External interlock.
Option Resistorn network; Built In resistor network of Figure 110.
Option: 220, 230 or 240V Mains power

Output Voltage (Vtest)	0 – 380 V +5%, -0%
Rise Time (Tp)	1.5mS ≤ Tp ≤ 2.5mS
Duration (Tw50)	3mS ≤ Tw50 ≤ 5.5mS
Source Impedance	10 Ω
Rout	R1 50 Ω ±5%, R7 5 Ω ±5%
Voltage Control	Manually, by turning a knob in front panel
Polarity Control	Positive and negative. Alternating control available optional computer control
Voltage Display	4 digit LED display
Voltage Meter Accuracy	±4V
Duty Cycle	1 pulse every 20 seconds
Line Voltage	120V AC, 50/60Hz
Environmental
Operating Temperature	15-40 ºC
Relative Humidity Range	0-90% non-condensing
General
Dimensions	17” wide x 3U high x 17” in deep
Weight	0 lbs approx.

Tech Specs

Test Equipment General Attributes
Unique Features	Up to 380V test voltage Microcontroller technologies, front panel voltage meter indicates test peak open circuit voltage and polarity Output voltage and polarity are controlled manually from the front panel
Warranty	1 YEARS
Interfaces I/O	RS-232, USB
Product Weight	30 LBS
Product Length	17 IN
Product Width	17 IN
Shipping Weight	50.00 LBS
Calibration Included	NIST Calibration
Power Supply Voltage	120V 50/60 Hz
Country of Origin	United States