My Account

Log in to Your Account

Not a member yet? It's FREE!

Join

Why Join? Gain access to exclusive pricing, rewards and more!

Member Pricing & Rewards active

(877) 571-7901

[email protected]

()

Shop By Category
Top Categories
Clamp Meters
Datacom and Networking Products
Dataloggers Data Acquisition
Signal Generators / Counters
Ground Testers
HVAC Equipment and Instruments
Life Sciences Equipment
Megohmmeter / Insulation Resistance Testers
Microscopes
Multimeters
Oscilloscopes
Power Measurement
Power Supplies
Process / Calibration
RF, Microwave, EMI
Safety Testing / Surge Testing
Soldering Equipment
Thermal Imagers
Shop All Categories
With a century of knowledge and product research behind them, Enerpac, best known for its hydraulic tools, can be your go-to for thousands of applications across every industry. SHOP NOW

Get up to 15% off with the FLIR Ex-Series sale! These cameras are powerful troubleshooting tools for building, electrical, and mechanical applications. With various available models, you can fit your target size, working distance, visual detail needs, and budget.SHOP NOW
Brands
- Rigol
- Megger
- Hioki
- Hakko
- Mastercool
Promotions
Clearance

Member Price INACTIVE
Create a FREE Account to Unlock Your Savings
Member Price ACTIVE

Compliance CAL-MP-10X700-7P Calibration of MegaPulse 10X700-7P

Name: Compliance CAL-MP-10X700-7P Calibration of MegaPulse 10X700-7P
Brand: Compliance West
SKU: ComplianceCAL-MP-10X700-7P
Price: 487.01 USD
Availability: InStock

0 reviews | Catalog: CAL-MP-10X700-7P | Model: Compliance West CAL-MP-10X700-7P

Compare

Calibration of MegaPulse 10X700-7P, Calibration Certificate, Data, Waveforms

Ships with cables, graphs of theoretical and actual waveforms.
Calibration Certificate
Options include relay outputs for PLC control, and a 1000:1 oscilloscope output BNC jack.
One year warranty

View Product Details

List Price: $500.00

In Stock:

View Payment Options

Recommended for you

Compliance CAL-MP-10X700-7P Calibration of MegaPulse 10X700-7P

The MegaPulse 10x700-7P waveform is designed to provide a stable and repeatable pulse as needed to conduct the test described in EN60950, Annex N, Table N.1, Line for Data Processing Equipment. This tester can test for the Australian Deviation, which requires a 7kV peak surge. The resistor bank has been completely redesigned to provide repeatable pulse with little change in output impedence during multiple pulse deliveries. The waveform is in tolerance with the requirements of IEC 1180 from 1000-7000V at the bulk cap ans has an output impedance of 40 ohms. The front panel meter reads the bulk capacitor voltage (not the output voltage) in accordance with the requirements of Annex N.

Controls, Indicators, Connectors – MegaP ulse 10x700-7P Front Panel

ITEM	NAME	FUNCTION
1	VOLTAGE Adjust Knob	Adjust the voltage set point in the tester. Turn Clockwise to increase the output voltage after the CHARGE button has been pressed. Turn the knob fully counterclockwise (lowest voltage setting) before the start of each test, and afterthe end of each test.
2	POLARITY switch	Toggles the output pulse polarity from Normal to Reverse, Normal for positive and Reverse for Negative, The pulse will appear on the Output jack relative to the return jack The polarity switch only operates when the CHARGE indicator is lit and the voltage on the display meter is less than 180V. The polarity is Normal when the NOR indicator is lit and, Reverse when the REV indicator is lid.
3	NOR REV indicator	Indicates the state of the Output Polarity switch. NOR indicates Normal (Positive) position. REV indicates Reverse (Negative) position.
4	CHARGE switch	Starts the charge process of the tester capacitor. The CHARGE indicator will turn off after the CHARGE switch is pressed, and the TRIGGER indicator will turn on. The charge process will stop after 2 minutes if the TRIGGER button is not pressed.
5	CHARGE indicator	This Yellow indicator is lit to show that pressing the CHARGE switch is the next logical step in a test sequence. CHARGE indicator is lit when the tester is turn ON an after pressing TRIGGER button. CHARGE indicator will go out after pressing CHARGE button. CHARGE and TRIGGER Indicators will be blinking if the Interlock Switch is open. (Only testers with Interlock SwitchOption)
6	TRIGGER switch	Triggers the output impulse waveform. The impulse waveform will appear across the output leads.
7	TRIGGER indicator	This Red indicator is lit to show that the tester can be trigger. TRIGGER indicator is lit for 2 minutes after the CHARGE button is pressed. TRIGGER indicator will go out after pressing TRIGGER button. TRIGGER and CHARGE Indicators will be blinking if the Interlock Switch is open (Only testers with Interlock Switch Option) TRIGGER indicator will blink at when the Voltage. This effect will remain on until the TRIGGER switch is pressed. (Only testers with PC Interface option)
8	VOLTAGE meter	Displays the output voltage set point. The voltage reading will increase from zero to the voltage set point when the CHARGE button is pressed. Note that the Voltage meter may indicate that some residual voltage is present on the main storage capacitor, even when the tester is first turned ON. This is due to inherent charging of the internal capacitors. Pressing the TRIGGER switch will discharge the capacitors. Note that the peak amplitude of the measured output waveform is proportional to the voltage that is read of the front panel of the MegaPulse, but it will always be somewhat lower. This is because the meter on the MegaPulse is measuring the voltage on the main impulse storage capacitor. This voltage will intentionally dissipate to some extent before reaching the output leads. The meter will start to flash at 12210V to indicate that voltage is in the maximum limits. If unit includes PC Interface and the Keyboard is locked, the display will show OFF when a button is pressed.
9	OUTPUT jack	The impulse waveform appears on the OUTPUT jack, referenced to the RETURN jack. When the POLARITY switch is in the Normal position (NOR indicator is lit) the output will be a positive pulse. When the POLARITY switch is in the Reverse position (REV indicator is lit) the output will be a negative pulse.
10	RETURN jack	This is the return for the impulse waveform. This jack is referenced to the chassis of the MegaPulse, and is referenced to earth ground as long as the MegaPulse is properly grounded. Even though this jack is referenced to ground, it should be treated as hazardous whenever the MegaPulse is turned ON.

Controls, Indicators, Connectors – MegaPu lse 10x700-7P Rear Panel

ITEM	NAME	FUNCTION
1	Appliance Inlet /Fuseholder / Power Switch	Use supplied cordset to connect the MegaPulse 1.2x50-12P tester to an appropriate source of supply. Fuse holder provides access for Fuse replacement, and the Power Switch is used to turn the tester ON and OFF.
2	RS-232 Interface (Optional)	Apply a 5V (25mA) voltage signal for 500mS +/-200ms to start the Trigger process.
3	Interlock Switch (Optional)	Emergency Stop Close: Enables the tester buttons for operation. Open: Stops any process in the tester and disables the buttons. The TRIGGER and CHARGE Indicators will be blinking
4	Fuse replacement warning / Rating of power supply	Specifies replacement fuse and required supply voltage.

Waveform Measurement Setup

Testing

This section describes how the MegaPulse 10x700-7P tester is used to conduct a test. The test can be stopped immediately at any time by turning OFF the rear-panel power switch.

Connect the tester to a proper source of supply using the included 18 AWG power supply cord.Make sure that the front panel VOLTAGE adjust knob is turned fully counterclockwise.
Plug the Output and Return test leads into the jacks on the front panel.
Connect the ends of the test leads to the equipment under test.
Turn the Tester on. Toggle the POLARITY switch as needed so that the NOR or REV indicator is lit.
Note that the Voltage meter may indicate that some residual voltage is present on the main storage capacitor, even when the tester is first turned ON. This is due to inherent charging of the internal capacitors. Pressing the TRIGGER switch will discharge the capacitors (be sure not to touch the output and return leads when pressing the trigger switch).
Push the yellow CHARGE button. Verify the red TRIGGER indicator is now lit.
Adjust the VOLTAGE knob so that the front panel LED display is reading a voltage that is suitable for the measuring instrument that is being used. Push the red TRIGGER button, when the desired voltage is displayed on the front panel meter.
Note that the peak amplitude of the measured output waveform is proportional to the voltage that is read of the front panel of the MegaPulse, but it will always be somewhat lower. This is because the meter on the MegaPulse is measuring the voltage on the main impulse storage capacitor. This voltage will intentionally dissipate to some extent before reaching the output leads.

Specifications
ELECTRICAL
Output	Up to 7000 Volts at bulk cap; controlled by front panel knob. Bulk capacitor voltage is displayed on the front panel meter. Positive or ne gative polarity is chosen via front-panel button. Virtual Impedance: 40 ohms.
Voltage Waveform	10x700us @ 1000-7kV at bulk cap: Per EN60950 Annex N (incl Australian Deviation). Peak Value: 1000-7kV ±3% (independent of meter tole rance). Front time: 10uSec ±30% [Trise= 1.67 (T90%-T30%)] per IEC 1180. Duration: 50uSec ±20% (Time to half-value) per IEC 1180
Current Waveform	40 ohm tester outputs up to 175A peak
Meter Accuracy	±3% 1000-7kV.
Test Adjustments	Amplitude via front panel knob and shown on front panel digital meter.Polarity adjustment via front panel button.
ENVIRONMENTAL
Operating Temperature	15-40 ̊C.
Relative Humidity Range	0-90% non-condensing
GENERAL
Input Power Requirements	114-128V, 50/60Hz, 2A.
Weight	30 lbs. approx. Shipping weight 40 lbs.
Dimensions	17 in. (W) x 3U in (H) x 17 in (D). 6U x 17" x 17" (Option IER: IER IEC Switch
OPTIONS AND OPERATION
Manual operation	Operator connects the provided output and return c ables to the MegaPulse and the DUT. Operator select s waveform polarity, pushes the CHARGE button on the front panel and wa its until the front panel meter indicates test volt age. Operator conducts the test by pushing the TRIGGER button on the fron t panel.
Options
RI	Relay isolated relays for connection to customer PLC via USB.
TMM	TestMinder allows test to be timed using computer clock and run from a PC.
240	240V mains operation.
230	230V mains operation.
220	220V mains operation.
BNCV	Voltage BNC 1000:1 (Reference only).
IER	IEC 65 Figure 7b switch. (6U enclosure).

0

Out of 5

Average Customer Review

Share your thoughts with other customers

Write a Review

Compare

Real people, here to help you.

Get Connected

Join the community and find out what we're up to, experience live product releases, webinars and more!

How Can We Help You?

Questions?

Log in to Your Account

Not a member yet? It's FREE!

Top Categories

BK Precision

Siglent

Keysight

Thermo Scientific

FLIR

Rigol

Megger

Hioki

Hakko

Mastercool

Instek

Weller

AEMC Instruments

Fieldpiece

Honeywell BW

Enerpac

Greenlee

JBC

Associated Research

View All Brands

Compliance CAL-MP-10X700-7P Calibration of MegaPulse 10X700-7P

Recommended for you

Compliance CAL-MP-10X700-7P Calibration of MegaPulse 10X700-7P

0

Featured Review

We'd love to hear from you

(877) 571-7901

Send us an email

Live Chat

Real people, here to help you.

Get Connected

My Account

Promotions & Offers

Resources

Company