• Designed for measurement and temperature
• Two-line LCD display
• Stored in selectable time interval to internal nonvolatile memory
• Data transfer to the personal computer for further analysis

Thermometer is designed for record of temperature. Values are stored in non-volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM, or Ethernet interface by means of a proper adapter.

Main Applications of Thermometer

• Food and Beverage Industry (HACCP)
• Pharmaceutical Industry
• Horticulture and Cultivation of Plants
• Laboratories (GLP)
• Building and Energy Management
• Research and Development
• Warehouses
• Technological Processes
• Museums, archives, galleries
• Transport of Food or Pharmaceuticals
• Blood stations, pharmacies
• HVAC (heating, ventilation, air conditioning, cooling)

Advantages of Thermometer

• Included traceable calibration certificate from the manufacturer - Comet
• Fast data transfer to the PC (full memory for approximately 30s)
• Variability of connection to the computer - USB, RS232, Ethernet, GSM modem
• Permanent connection to the PC enabled, data is possible to download even during logging
• Large data memory 32000 values
• Large dual line display with special symbols, switchable
• Optional display of minimum and maximum measured values (reset of min/max memory from PC or by magnet)
• Dual level alarm is enabled for each channel, alarm is indicated by blinking of the value on the LCD display
• Two alarm modes are enabled: instant or with memory (detected alarm is indicated permanently till alarm memory is cleared from the PC)
• Robust watertight case
• Easy installation, locking enabled
• Low power consumption from battery, battery life up to 6 years
• Indication of remaining battery life, easy replacement of the battery
• Logging start/stop is enabled in several ways: at certain time and date programmed from computer, by delivered magnet
• Also special logging mode is enabled, when logging runs only, if some of measured values are out of adjusted alarm limits
• Each data logger is possible to describe with text of maximum 32 characters
• Each channel is possible to describe with the text of maximum 16 characters
• Password protection is enabled to prevent unauthorized manipulation with logger