Comark Wireless Temperature Monitoring System Air Probes
Air probes are often designed to have a very quick response with a low thermal mass. The sensor is designed to be as small as possible so that the air temperature is transferred to the probe with minimal temperature loss or gain to maintain a higher degree of accuracy. However, all Comark Air Probes for the wireless temperature monitoring systems are inherently designed to be slow.
Comark supplies a damped air probe style for the wireless monitoring systems, which comes in the form of a small stainless steel bullet-shaped end.
This type of construction has two purposes:
- It protects the sensor from physical damage
- It slows the response of the probe down significantly
In certain scenarios, it is beneficial to have a slower response to changes in air temperature. When you place a probe inside a refrigerator or freezer, you may not want an alarm going off every time someone opens the door.
The Damped Air Probes do a good job of reflecting the samples in the fridge. As the Wireless Monitoring System is your early warning notification for any alarms, it would be unsuitable if ‘false alarms’ were constantly being raised.
All Comark’s wireless temperature monitoring system air probes are fitted with a 6-pin Lumberg connector and a stainless-steel damped air probe end: