• Compliant with IEC 61000-4-5 Surge Waveform Requirements 1.2/50, 8/20 μs Combination Wave 10/700, 5/320 μs Combination (Telecom) Wave
• Peak Surge Output Voltage Level Adjustable from 200V to 4000V for each Waveform
• Can be Operated via Front Panel Interface or via Remote PC through Fiber Optic Interface using TransWare-645 software
• Voltage (1000x1) and Current (100x1) Monitor Ports are located on front panel
• Internal Power Line CDN (up to 16 Amps); External Power Line CDNs Available with Current Ratings up to 100 Amps

The SGIEC-645 is a state of the art, compliance level Surge Generator designed for IEC 61000-4-5 surge immunity testing. It is capable of generating both the 1.2/50, 8/20 μs combination wave, and also the 10/700, 5/320 μs combination (telecom) wave. Output levels are adjustable from 200V to 4 kV in one volt increments.

Surges can be applied to single-phase AC or DC power lines (up to 16A) using the integral, internal Coupling/ Decoupling Network (CDN).

Using the auxiliary (A/B) output terminals and available external CDNs, surges can also be applied to:

• unshielded, unsymmetrical interconnection (data) lines (1.2/50, 8/20 μs waveform)
• unshielded, indoor symmetrical interconnection (telecom) lines (1.2/50, 8/20 μs waveform)
• unshielded, outdoor symmetrical communication (telecom) lines (10/700, 5/320 μs waveform)
• shielded lines (1.2/50, 8/20 μs waveform - no CDN req.'d)
• single-phase and three-phase power lines at current levels up to 32 or 100 Amps

The SGIEC-645 Surge Generator is equipped with voltage (Vmon [1000x1]) and current (Imon [100x1]) monitor ports for verification of peak voltage/ current output levels. Also, the synch output port connects to the external trigger input of the oscilloscope.