• Metal-in anti-static bags
• Five layer construction to maximize ESD protection
• Protects components from EMI interference and ESD risk that metal-out bags cannot
• Reliable burst, puncture, pull and tear strength
• Metal-in construction fully isolates contents

Botron’s Metal-In Flat and Zip Shielding Bags are made from a layered, metalized polyester with static dissipative inner and outer layers. The polyester dielectric and metal layer create a Faraday effect for shielding of ESD. ESD sensitive materials stored inside the bag are provided a static safe environment.

The metal-in formulation of Botron Anti-static Shielding Bags protects components from EMI interference and ESD risk that metal-out bags cannot. Metal-in construction fully isolates its contents inside preventing risk of contact with charged conductors or unintended paths to ground.

The inner and outer film of Botron’s Anti-static Shielding Bags is low tribocharging, therefore charges that can occur during handling are drastically reduced. Additionally, the anti-static film is low capacitance, meaning not only will it not hold a large charge, any charge buildup will be quickly dissipated.

Two styles available

Botron’s Metal-In anti-static bags are available in two styles – flat or zip. There are also many different sizes of each.

Additional Features:

• Prevents risk of contact with charged conductors or unintended paths to ground
• Inner and outer film are low tribocharging
• Anti-static film features a low capacitance – large charges will not hold, and any buildup in quickly dissipated
• Bright yellow ESD markings