| Technical Data |
| Drive | 7.5 HP main drive motor.
Variable frequency AC motor controller with braking; field programmable with self diagnostics.
Rotary dial speed control with six preselectable speeds.
Backlash free flexible coupling; laminated disc design (Light Duty).
Flywheel moment of inertia: WR2 = 1145 lb. in2 (0.336 kgm2).
Acceleration/Deceleration factory set at 200 RPM/Sec. |
| Calibration Fluid Supply System | Meets Cummins minimum flow restriction requirements for high flow pumps
Reservoir capacity 13 gallons (50 liters).
Large 10 micron submersed reservoir filter.
Automatic temperature control of calibration fluid to ±1°C (±1.8°F); heating by electric submersible heaters, cooling by flowing tap water through copper finned tubing in reservoir.
Transfer pump driven by a separate 1/3 horsepower motor at a rate of 150 GPH (9.5 liter/min) at zero pressure; valves for controlling fuel supply pressure and for suction testing of injection pumps with integral transfer pumps. |
| Instrumentation | Dual mode digital tachometer and stroke counter, automatic shift from tachometer to stroke count; accuracy ±1 RPM, ±1 count.
Compound pressure/vacuum gauge, range: 0-30" Hg (0-76 cm Hg) vacuum; 0-100 psi (0-6.9 bar) pressure; measured in fuel supply line.
Fuel inlet temperature gauge: Range 40°- 140°F (5-60°C). |
| Calibration Fluid Collection and Reading | Single block 8 unit accumulator.
Accumulator mounts on either side of stand for ease of pump connection.
Accommodates "S" and "T" size nozzles.
8 collection graduates, 160 cc clear acrylic pyramidal design with 0.5 cc subdivisions 0-35 cc and 1 cc subdivisions from 35-160 cc.
Manually operated graduate drain |
| Dimensions | Width: 28" (.71m)
Height: 68" (1.73m)
Depth: 40" (1.02m) |
| Weight | Weight: 1200 Ibs (545 kg) |
| Services Required | Electrical: 230 volts, 3 phase, 60 Hz, 50 amperes (standard).
Water: Cold tap, approximately 1.2 GPM (4.5 liter/ min), gravity drain. |
| Accessories | Common hardware, fittings and hoses included.
Accessories consisting of mounting brackets, fuel lines, test nozzle holders, adapter rings, drive hubs and fittings are available for a wide variety of fuel pump applications. Consult the Accessory Set and Fuel Line Summaries for specific requirements.
The dimension of the drive shaft centerline to the centerline of the mounting rails (11.25", 26 cm) permits use of accessories from other early production rail mount Bacharach stands.
Final Stage Filter and Gauge Kit 0067-7610: Contains hoses, spin-on 2 micron filter, mounting hardware including gauge (range 0-100 psi, 0-7 kg/cm2) for customer installation.
Pressure Lube System 0067-7227: Complete with self-contained lube supply, filter, hoses and quick disconnects.
Portable High Pressure Timing Unit 72-7010 and High Pressure Valves (8) 0067-2824: Contains high pressure pump and reservoir with separate filter. Required for timing and phasing many in-line multi-plunger injection pumps. |