| DOCK2-2-2A2E-00-G Specifications |
| The MicroDock II base station and docking modules are for indoor use only. |
| Instrument dimensions |
(w x l x h) 21.2 x 26.3 x 8.2 cm (8.3 x 10.4 x 3.2 in.) base station and one docking module |
| Weight |
0.98 kg (2.15 lb.) |
| Enclosure |
Impact resistant PC/ABS (polycarbonate) |
| LCD |
4 line x 16 characters, wide viewing angle, user-defined backlighting |
| Base system ingress protection |
IP20 |
| Operating temperature |
+10°C to +35°C (+50°F to +95°F) |
| Humidity |
0 to 50% |
| Storage temperature |
-10°C to +60°C (+14°F to +140°F) |
| Power Supply |
6 Vdc , 1.5 A wall adapter or four C-cell batteries (be advised that the main supply voltage fluctuations are not to exceed 10% of the nominal supply) |
| Real-time clock |
Provides time and date stamp for “last calibration” and “last bump test” data |
| Data Storage |
Automatic (instrument and base station)
128 MB Delkin MMC data storage system |
| Communications method |
Infrared communication between docking module and detector |
| External interface |
USB 2.0 interface for PC (USB 2.0 full speed) |
| Pump |
DC motor, micro-diaphragm; 6V PCB mount
Flow rate 300 ml/min (typically) |
| Solenoid |
Built-in (docking modules) |
| Calibration gas connections |
Built-in (base station) |
| Gas connections |
1/8" SMC connect sub-miniature coupling
2 gas inlets (standard), 5 gas inlets (maximum) |
| Detector configuration |
Automatic recognition of instrument and sensors
User-settable with Fleet Manager II software |
| Command Keys |
Base station: Menu navigation
Docking module: One touch bump-test initiation
One touch calibration initiation: not applicable to the GasAlertClip Extreme
One touch data transfer initiation: GasAlert Extreme, GasAlertMicroClip, GasAlertMax XT, and GasAlertQuattro only |
| LED indicators (on each docking module) |
Yellow “TEST”, Green “PASS”, Red “FAIL” |
| Warranty |
Full 2 year warranty |