Display: 3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999 Polarity: Automatic, positive implied, negative polarity indication Overrange: (OL) or (-OL) is displayed Zero: Automatic Low Battery Indication: The Indication is displayed when the battery voltage drops below the operating level Measurement Rate: 2.5 times per second, nominal Operating Environment: 0 ?C to 50 ?C at 70 % R.H. Storage Temperature: -20 ?C to 60 ?C, 0 to 80 % R.H. with battery removed from meter Accuracy: Stated accuracy at 23 ?C ? 5 ?C, 75 % relative humidity Temperature Coefficient: 0.1 x (specified accuracy) per ?C (0 ?C to 18 ?C, 28 ?C to 50 ?C) Altitude: 2000 m (6561.7 ft) Power: Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22 Battery Life: 200 hours typical with carbon-zinc Dimensions: (H x W x D) 155 mm x 72 mm x 32 mm (6.1 in x 2.8 in x 1.3 in) Weight: Approx. 210 g (7.4 oz) including battery Warranty: One-year DC Volts Ranges: 200 mV, 2 V, 20 V, 200 V, 1000 V Accuracy: ? (1.0 % rdg + 1 dgt) AC Volts (45 Hz to 500 Hz) Ranges: 200 mV, 2 V, 20 V, 200 V, 750 V Accuracy: ? (1.5 % rdg + 5 dgts) Voltage Resolution: 100 µV Voltage Input Impedance: 10 M? Overload Protection: 200 mV: 1000 V dc or 750 V ac rms (3 minutes) All other ranges: 1000 V dc or 750 V ac rms DC Current Ranges: 200 µA, 2 mA, 20 mA, 200 mA Accuracy: ? (1.5 % rdg + 1 dgt) AC Current (45 Hz to 500 Hz) Ranges: 200 µA, 2 mA, 20 mA, 200 mA Accuracy: ? (2.0 % rdg + 5 dgts) Current Resolution: 0.1 µA Input Protection: 315 mA/1000 V fast blow ceramic fuse 6.3 mm x 32 mm on mA input Burden Voltage: 300 mV max. (1 V max. on 200 mA range) Resistance: 200 ? , 2 k? , 20 k? , 200 k? ? (1.0 % rdg + 4 dgts) Resistance: 2 M? ? (1.5 % rdg + 4 dgts) Resistance: 20 M? ? (2.0 % rdg + 5 dgts) Resistance Resolution: 100 m? Open Circuit Voltage: 0.3 V dc typical, (3.0 V dc on 200 ? range) Overload Protection: 1000 V dc or 750 V ac rms Continuity: Audible Indication: 75 ? ? 25 ?, Response Time: 100 ms Diode Test Current: 1.0 mA (approximate) ?(1.5 % rdg + 3 dgts) Diode Test Resolution: 1 mV Open Circuit Voltage: 3.0 V dc typical Non-Contact Voltage Indicator: Sense voltage 70 V to 600 V ac; beeper chirps and bright red LED on, works on all ranges Battery Test: 1.5 V, 9 V Accuracy: ? (3.5 % rdg + 2 dgts) |