| Model |
ADT680 |
ADT680W |
| Description |
Digital Pressure Gauge |
Wireless Digital Pressure Gauge with Data Logging |
| Wireless Communication (ADT680W only) |
N/A |
Wireless Frequency: 2.4G ISM Bands, 20 meter range |
| Number of wireless Channels: Chanel 1-15 |
| Software: Wireless network demo software included read up to 20 gauges. |
| Data Logging (ADT680W only) |
N/A |
Storage Capacity: 140,000 readings (time, pressure, and temperature) |
| Storage Interval: Adjustable from 1-9999 Sec |
| Single-button-press data logging enabled |
| Key Lockout: When the gauge is in auto-storing mode, the front panel buttons will be automatically locked. |
| Pressure Type |
Gauge Pressure, compound Pressure |
| Accuracy |
0.05%, 0.1% or 0.25%FS |
| Update Rate |
10 times/Sec ,3 times /Sec (default), 1 time /Sec ,1 time/15 Sec |
| Operating Temperature |
14°F to 122°F (-10°C to 50°C) |
| Compensated Temperature |
14°F to 122°F (-10°C to 50°C), accuracy guaranteed |
| Storage Temperature |
-4°F to 158°F (-20°C to 70°C) |
| Overload Pressure |
1.2X |
| Dimensions |
100mm x 40mm, total height:157mm |
| Weight |
500g |
| Filtering |
Averaging (3 to 10 samples) or low-pass first-order filter. |
| Max/Min data capture |
Saves Max and Min data during pressure measurement. |
| Engineering units |
Pa, kPa, MPa, bar, mba, psi, kgf/cm2, mmH2O, mmHg, inH2O, inHg, ozf/in, %, °C, °F extend units: inH2O(20°C), inH2O(60°F), mmH2O(20°C), mmH2O(15°C), ftd2O(60°F), or ftd2O(4°C) |
| Display |
LCD Specification: FSTN-LCD,Visual scope 36x61mm |
| Full 5 digits,15.2mm High |
| 7 segment analog bar graph scaled from 0-100% of FS |
| Backlight: White |
| Backlight Duration: Not auto off,15,30,45,60 seconds optional |
| Auto off |
Disabled,15, 30, 45, 60, 90, or 120 Minutes |
| Compliance |
Certificates:CE R&TTE, FCC ID, IC ID |
| Protection Level: IP67 |
| Vibration: 5g(20-2000Hz) |
| Shock resistance: 100g/11ms |
| Pressure Port |
≤15,000 PSI: 1/4NPT male, 1/2NPT male, 1/4BSP male, 1/2BSP male, M20×1.5 male |
| >15,000 PSI: 1/4HP female or 1/4HP male *1/4HP female: Autoclave F-250-C, 9/16" - 18 UNF-2B *1/4HP male: Autoclave M-250-C, 9/16" - 18 UNF-2A |
| Other connections available per request. |
| Over-pressure Alarm |
Display will flash over 120%FS |
| Battery voltage Indicator |
Displays the battery life remaining. When the battery voltage is too low, the gauge will power-off automatically. |
| Over-pressure Record |
Gauge will record max pressure data when the gauge is over pressured by 120% of FS. |
| Leakage test |
In leak test mode, the gauge will record beginning pressure, ending pressure, and show the difference ΔP. |
| Factory Reset |
Resets all settings back to factory default, except the calibration parameters. |
| Warranty |
1 year |