| Adash A4400 VA4 Pro Technical Specifications |
| Input channels |
4 AC, ICP® power supply on/off 4 DC for process values 1 TACHO for external trigger |
| Input range |
AC +/- 12 V peak-peak DC +/- 24V |
| AD conversion |
24 bit, 64 bit internal signal processing No AutoGain function! |
| Dynamic range S/N |
120 dB |
| Frequency ranges |
Maximum range: 1 Hz - 90 kHz (1 Ch, 194 kHz sampling) |
| Maximum range |
1 Hz - 25 kHz (4 Ch, 64 kHz sampling) |
| Minimum range |
1 Hz - 25 Hz (4 Ch, 64 Hz sampling) |
| Sampling mode |
Fully simultaneous for 4 channels |
| FFT resolution |
Min. 100 lines Max. 3 276 800 lines |
| Unit modes |
Analyzer - analytic measurement Data collector - route measurement Balancer - on-site balancing Run up/Coast down Recorder - signal recording Stethoscope FASIT - Expert system for fault detection Octave analyzer Bump test ADS - Animated Deflection Shapes |
| Processor |
Intel Atom 1.6 GHz |
| Memory, Route |
120 GB, max. 4 GB for one route, number of routes is limited by free memory only |
| Data processing |
Real time FFT DEMOD - ENVELOPE analysis ACMT - low speed bearing analysis Order analysis User band pass analysis RPM measurement DC measurement Orbit measurement |
| Signal Recorder |
64 kHz sampling frequency 4 Ch memory consumption 3 GB/hour 4 Ch total recording - 35 hours |
| Trigger |
Manual, External, Signal level, Time Use for signal recording trigger Speed change, Time interval |
| Display |
Colour 800 x 600 pixels, LCD |
| Communication |
USB |
| Temperature range |
-10˚C to +50˚C |
| Power |
Battery 5 hours of operation, AC 230 V |
| Case |
Aluminium heavy duty |