Adash America A4300 US Ultrasound Module

We would like to explain a few terms in the beginning of this chapter. Higher frequency energy above 20kHz is best detected with an ultrasonic sensor. Most useful information is found between 30 and 50kHz. The Adash ultrasonic module enables monitoring ultrasonic energy.

Ultrasound utilizes a solid, liquid or gas to transmit (will not exist in a vacuum), and is a very directional and short waveform. It has several things in common with the vibration, for instance the ability to detect the ultrasound energy requires the sensor to be focused in the direction of the waveforms.

Field applications for airborne ultrasound detection:

• Consider the wave energy is easily reflected and attenuated.
• When looking to detect airborne ultrasound energy a rule of half distance twice amplitude is a good thing. to consider, this is called the "inverse rule".
• Remember airborne ultrasound is easily reflected, when detecting a leak, you should turn in the other. direction to determine if the sound is coming from behind you.
• Use shields such as cardboard to isolate the potential defect from other sources.

• Air leaks
• Vacuum leaks
• Electrical Arcing
• Electrical Corona
• Tightness testing where a signal generator is located within a sealed unit, then by scanning the sealed
• areas from the outside leaks can be detected.

• Early signs of poor lubrication in anti-friction roller bearings
• Impacting noise from defects in roller bearings including bearings with shaft speeds under 100 rpm
• Steam trap leakage and failures
• Gearbox defects
• Valve leakage
• Actuator malfunctions