|
CB108-C84-006-D2C |
6 ft. coiled sensor cable 2 Pin Mil for Accelerometer |
N/A |
Discontinued |
|
CB117-C539-006-J4C
|
6ft Coiled cable for triaxial accelerometer. Used for portable route data collection. |
|
Request Quote
|
|
CB117-C539-010-J4C |
Coiled cable for triaxial accelerometer 10FT |
N/A |
Discontinued |
|
CB117-C539-010-JC |
Coiled cable for triaxial accelerometer 10FT |
N/A |
Discontinued |
|
CB117-C84-010-J4C |
Coiled cable for triaxial accelerometer 10FT |
N/A |
Discontinued |
|
CLB 001
|
One Day Classroom Balance Course: Students learn basic balance applications utilizing the Adash Balance software . Includes hands on practice with Adash 4300, 4400 and 4404 units. Schedule and locations vary. Lunch and course manual provided. |
|
Request Quote
|
|
CLM002
|
Two-day Classroom Multi-Channel 4400, 4404 users (and advanced users of VA3) Implementation Course: Required completion of Vibration Analysis Theory course or advanced familiarity with vibration analysis theory. Students will learn normal route management and advanced functions of using the transient and recording features. DDS Digital Diagnostics Software analysis applications in spectrum and waveform. |
|
Request Quote
|
|
CLM003
|
Three Day Combined Classroom Vibration Analysis Theory and Multi-Channel 4400, 4404 and advanced VA3 Users Implementation Course: Schedule and locations vary. Lunch and course manual provided. |
|
Request Quote
|
|
CLS 002
|
Two-Day Classroom Single Channel Users Application Course by certified vibration analyst: For Lubri, Vibrio and VA3 students that want to learn hardware and software implementation. Includes route building, trend and baseline management. Recommend completion of Vibration Analysis Theory course prior to this course or familiarity with vibration analysis theory. Schedule and locations vary. Lunch and course manual provided. |
|
Request Quote
|
|
CLS 003
|
Three-Day Combined Classroom Vibration Analysis Theory and Single Channel Users Implementation Course: Schedule and locations vary. Lunch and course manual provided. |
|
Request Quote
|
|
CLT 001
|
One-Day Classroom Vibration Analysis Theory Course by certified vibration analyst: Schedule and locations vary. Lunch and course manual provided. |
|
Request Quote
|
|
DDS DM
|
DDS Pro License (single seat) and Data Manager Software: Combines portable analyzer data with online data from the 3700 and 3800 systems. Enables customers to view in one data base a fully integrated machine vibration monitoring system where critical equipment is monitored 24/7 and less critical equipment is monitored parodically with portable systems. Data from online monitoring systems will provide automated email alerts when values exceed reset threshold limits. Request special pricing for multiple seat licenses. |
|
Request Quote
|
|
DDS2011Pro |
Digital Diagnostic Software compatible with 3700 online systems. |
N/A |
Discontinued Replaced by: DDS2018 PRO |
|
DDS2011Pro-View |
Software database system for 3700 online system viewing. Bearing database included - view only version |
N/A |
Discontinued Replaced by: DDS2018 PRO |
|
DDS2014Pro |
Software database system - Pro version condition monitoring software. Bearing database included. |
N/A |
Discontinued Replaced by: DDS2018 PRO |
|
DDS2014Pro-View |
Software database system - Pro version, Bearing database included - view only version |
N/A |
Discontinued Replaced by: DDS2018 PRO |
|
DDS2016 ENT |
Enterprise version of DDS2016 Pro Software. Use for multiple access points on common server. Connect to any Adash monitoring system to enable upload and download of databases and analysis of data. Will enable condition monitoring of data from 4910, 4900, 4300, 4400, 4404 and 3700 systems with full integration. Request special pricing for multiple seat licenses. |
N/A |
Discontinued Replaced by: DDS2018 ENT |
|
DDS2016 PRO |
DDS2016 Licensed Pro version. Use to connect to any Adash Monitoring system to enable upload and download of databases and analysis of data. Will enable condition monitoring of data from 4910, 4900, 4300, 4400, 4404 and 3700 systems with full integration. Request special pricing for multiple seat licenses. |
N/A |
Discontinued Replaced by: DDS2018 PRO |
|
DDS2016 SCP |
DDS2016 Licensed version for single channel 4910 and 4900 users. Allows for use of multiple databases and no limit for database size. Use key dongle to enable. Request special pricing for multiple seat licenses. |
N/A |
Discontinued |
|
DDS2018 ENT
|
Enterprise version of DDS2018 Pro Software. Use for multiple access points on common server. Connect to any Adash monitoring system to enable upload and download of databases and analysis of data. Will enable condition monitoring of data from 4910, 4900, 4300, 4400, 4404 and 3700 systems with full integration. Request special pricing for multiple seat licenses. |
|
Request Quote
|
|
DDS2018 PRO
|
DDS Pro License - Digital Diagnostics Software (single seat): Use to connect to any Adash Monitoring system, to upload and download databases, and to analyze data. Will enable condition monitoring of data from 4910, 4900, 4300, 4400, 4404 and 4500 systems with full integration. Request special pricing for multiple seat licenses. |
|
Request Quote
|
|
DDS2018 SCP |
DDS Basic License: Single-seat license. This version is for single channel 4910 and 4900 units. Allows for use of multiple databases and no limit for database size. Use key dongle to enable. Request special pricing for multiple seat licenses. |
N/A |
Discontinued |
|
DDS2018 VIEW
|
DDS View License (single seat): This license allows the user to view and analyze multiple data bases without size limitations. It is useful for viewing and analyzing data from any Adash database. It cannot edit or change tree items or data. |
|
Request Quote
|
|
DM
|
Data Manager Software: Add this to any of the 3800 system packages to enable remote condition monitoring by enabling a license for one data base to utilize the DDS Digital Diagnostics Software via online ethernet connection. |
|
Request Quote
|
|
DM Plus 1
|
Adds an additional database to existing Data Manager system. |
|
Request Quote
|
|
DM UPGD
|
Upgrades existing DDS Pro License to connect to 3700 and 3800 online systems (limited to one database). This software package allows all Adash portable and permanent online systems to be utilized in one convenient software platform. |
|
Request Quote
|
|
ENT extension
|
Enterprise Version (ENT) of DDS, Data Manager and ADS software licenses. Upgrades the license key to a "NET Dongle" that when installed on a server customers can access software from any connected work station. Simultaneous access is limited to the number of seat licenses purchased. Request special pricing for multiple seat licenses. |
|
Request Quote
|
|
IP65 |
IP65 protection for VA4Pro device |
N/A |
Discontinued Replaced by: 4400 IP65 |
|
Memory upgrade add M |
Unit comes with 4 MB Memory for data storage. Free version of DDS2014 Software enables full analysis capabilities and route generation for condition monitoring of rotating equipment. |
N/A |
Discontinued |
|
MH101-1B |
Epoxy mount pad with 1/4 - 28 integral stud for permanent mount of sensors to surfaces. |
N/A |
Discontinued |
|
MH109-1B |
Loctite depend, .85 oz. epoxy dispenser with spray activator |
N/A |
Discontinued |
|
MH109-2A
|
Devcon two part epoxy for mounting pads. Mounts 15-20 pads. |
|
Request Quote
|
|
MH114-3A
|
Two pole magnetic base for sensor - good for data collection on curved surfaces. |
|
Request Quote
|
|
MH117-3A
|
Target surface preparation tool: Machines a flat surface on the target location so mounting pads can be installed with minimum epoxy and better frequency response. |
|
Request Quote
|
|
MH118-1A |
Fin mount probe pad, .5" x 1.25" probe tip. Requires epoxy mount. |
N/A |
Discontinued |
|
MH123-1A
|
Flat based rare earth magnet for sensor. Good for flat or target surfaces. |
|
Request Quote
|
|
MH127-3C
|
100 Count High Frequency Mounting Pads with cover and magnets: Used for route based data collection to get best frequency response from portable data collection. Two (2) magnets, 1 inch x 0.38 inch pads, covers and mounting adhesive. Recommend use surface preparation. |
|
Request Quote
|
|
MH127-3G
|
500 Count, High Frequency Mounting Pads with cover and magnets. Used for route based data collection to get best frequency response for portable data collection. Two (2) magnets, 1 inch x 0.38 inch pads, covers and mounting adhesive. Recommend use surface preparation. |
|
Request Quote
|
|
MH130-1A
|
High Frequency Mounting Pad with cover: Used for route based data collection to get best frequency response from portable data collection. 1 inch x 0.38 inch pad and cover. Recommend use surface preparation tool #MH117-3A for uneven surfaces prior to mounting and expoxy part number #MH109-2A for adhesion. |
|
Request Quote
|
|
MH133-1A |
Magnet Target for portable data collection, 1" diameter x 1/4" thick. Requires Epoxy mount. |
N/A |
Discontinued |
|
MH134-1A |
Zerk adapter mounting pad for accelerometers, 1/4" NPT mounting thread |
N/A |
Discontinued |
|
MH134-2A |
Zerk adapter mounting pad for accelerometers, 1/8" NPT mounting thread |
N/A |
Discontinued |
|
OML 001
|
Additional course manuals for onsite training. |
|
Request Quote
|
|
ONB 001
|
One Day Onsite Field Balance Application Course: Includes 1/2 day classroom and balance of day option in the field or lab. Includes up to 4 course manuals. Travel time billed at 500.00 per day. Expenses billed at cost +10%. |
|
Request Quote
|
|
ONT 001
|
One-Day Onsite Equipment Orientation Training by certified vibration analyst: Includes 1/2 day classroom and balance of day option in the field or lab application. Includes up to 4 course manuals. Travel time billed at 500.00 per day. Expenses billed at cost +10%. |
|
Request Quote
|
|
ONT 002
|
Two-Day Onsite Equipment Orientation by certified vibration analyst: Normally day one will be theory in vibration analysis with day two as 50% class on equipment and 50% field implementation. Includes up to 4 course manuals. Travel time billed at 500.00 per day. Expenses billed at cost +10%. |
|
Request Quote
|
|
ONT 003
|
Three-Day Onsite Extensive Equipment Orientation and Implementation training by certified analyst: Day 1 will be vibration analysis theory. Days 2 and 3 training will consist of software and hardware orientation, route and database management with adequate time for field implementation or lab exercises. Includes up to 4 course manuals. Travel time billed at 500.00 per day. Expenses billed at cost +10%. |
|
Request Quote
|
|
Pro H Head Phones |
Adds professional behind the hard hat configured headphones. (Included in Pro Upgrade) |
N/A |
Discontinued |
|
Pro Kit |
Upgraded to pelican type transport case, leather instrument carrying holster and industrial grade headphones. |
N/A |
Discontinued |
|
Proximity Upgrade add P |
This model allows for sensor power off function so that data can be collected from monitoring systems with their own power and buffered outputs such as proximity probes. |
N/A |
Discontinued |
|
SA-T1-100S
|
Acceleration sensor 100mV/g - Top exit standard sensor. Cable NOT included. Suggest either CB103-C84-006-D2C (6ft Coiled) or CB103-C84-004-D2C (4ft Coiled). Magnetic base NOT included. Suggest either MH114-3A (curved surface) or MH123-1A (flat surface) |
$190.93
|
Add to Cart Request Quote
|
|
SW11-20 |
Discount for 10-20th license |
N/A |
Discontinued |
|
SW2 |
Discount for second software license |
N/A |
Discontinued |
|
SW21-50 |
Discount for 20-50th license |
N/A |
Discontinued |
|
SW3-5 |
Discount for 3rd, 4th and 5th software license |
N/A |
Discontinued |
|
SW51-100 |
Discount for 50-100th license |
N/A |
Discontinued |
|
SW6-10 |
Discount for 6-10th license |
N/A |
Discontinued |
|
US100-AB
|
Airborne ultrasound microphone: Utilize to monitor 30-50kHz airborne ultrasound levels for air leaks etc. Fits 4300, 4404 and 4500 units. |
|
Request Quote
|
|
V 4900 Vibrio |
Vibrio Portable vibration meter/instrument with accelerometer, cable, AA batteries. Comes with preloaded FASIT Diagnostics and ISO Alarm options. Provides readouts in Velocity, Acceleration, Displacement plus infrared temperature sensor with readout. Hard-shell case includes cable, accelerometer, earbuds, motor fin tip probe. |
N/A |
Discontinued Replaced by: A4900 Vibrio |
|
VA3 4300 Base Unit |
Includes VA3 4300 Two Channel data analyzer, FASIT Diagnostics Program, coiled sensor cable, accelerometer, flat magnet, curved base magnet, professional hard shell case, charger. |
N/A |
Discontinued Replaced by: A4300 BP |
|
Vibrio Pro-case
|
Vibrio Pro-case - Hard shell professional transport case for 4900 Vibrio. Pre-molded internal foam to custom fit the unit and accessories (included in Pro upgrades). |
|
Request Quote
|
|
Vibrio SC
|
Vibrio SC - Pure leather instrument cover with shoulder strap for Vibrio (included in Pro upgrades). |
|
Request Quote
|