| MODELS |
1110 |
| Measurement Range |
.01 lx to 200,000lx |
0.01 fc to 18,580 fc |
| Accuracy |
±3% of R on incandescent sources
±6% of R on LEDs (3,000K to 6,000K)
±9% of R on flourescent sources |
| Accuracy with compensation |
LED mode: ±4% of R (at 4,000K)
Flou mode: ±4% of R (type F11, 4,000K) |
| Display Resolution |
0.1 lx (0.1 lx to 999.9 lx)
1 lx (1,000 lx to 9,999 lx)
10 lx (10,000 lx to 99.99 klx)
100 lx beyond |
0.01 fc (0.01 fc to 99.99 fc)
0.1 fc (100.0 fc to 999.9 fc)
1 fc (1,000 fc to 9,999 fc)
10 fc beyond |
| Recording |
Manual start/stop on the product Short press for MEM: spot recording/long press for REC at the defined default rate Programed recording: start date, recording interval, and end date defined using DataView® software |
| Other Functions |
MIN-AVG-MAX-HOLD |
| Sampling Rate |
Programmable from 1s, 2s, 5s, 10s, 20s, 30s, 2min, 5min, 10min, 15min, 30min, and 1h |
| MAP mode |
The MAP mode can be used to map the lighting on the surface of a room. In this case the measurements are saved in the same file |
| Memory |
1,000,000 measurements on each channel (4MB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed. |
| Communication |
USB 2.0 and Bluetooth |
| Power Source |
3x1.5V AA (LR6) alkaline batteries or USB port (micro-USB adaptor offered as an accessory) |
| Battery Life |
500hrs, 3yrs with 15min intervals |
| Dimensions |
Case: 5.9 x 2.84 x 1.28" (150 x 72 x 32mm)
Sensor: 2.64 x 2.52 x 1.38" (67 x 64 x 35mm) |
| Weight (with battery) |
12.2 oz (345g) with batteries |
| Case |
Polycarbonate |
| Operating temperature |
14° to 140°F (-10° to 60°C) |
| Storage temperature |
-4° to 140°F (-20° to 60°C) |
| Relative Humidity |
Up to 90% |
| Ingress Protection (IP) |
IP50 with USB connector closed and protective cap on sensor |
| EMC |
EN 61326-1 |
| Safety Compliance |
IEC 61010-1 |
| Warranty |
2 years |