| INTERFACE |
| Screen Specifications |
Color PC Screen (minimum resolution: 1024 X 748) |
| Display Mode |
8 X 10 div.- Multi-windowing (Control panel, trace, zoom, FFT, etc.) |
| Traces on Screen |
4 traces + 4 references |
| Service Control |
"Windows-like" & online help -- all commands available via mouse |
| VERTICAL |
| Vertical Sensitivity |
2.5mV - 100V/div, up to 250µV/div with vertical expansion |
| Bandwidth |
150MHz (bandwidth limiter: 15MHz, 1.5MHz or 5kHz) |
| Channels |
2 or 4 channels, class 1, common ground |
| HORIZONTAL |
| Time Base Speed |
35 ranges from 1 ns to 200s/div |
| TRIGGERING |
| Mode |
Auto, triggered, One-shot ROLL, auto-level at 50% |
| Source |
CH1, CH2, EXT, Mains or CH1 to CH4, Mains* |
| Type |
Edge, Pulse, Width or Delay (40ns - 10.5s), counting (2 - 16,384 events),
TV (525 = NTSC, 625 = PAL/SECAM),
Pre-triggered adjustable from 0 to 100%,
Hold-Off (40ns - 10.5s) |
| DIGITAL MEMORY |
| Maximum Sampling Speed |
Repetitive = 100GS/s
One-shot = 200MS/s |
| Vertical Resolution |
10 bits (9 bits used) |
| Memory Capacity |
Depth = 50,000 points – storage capacity depends
on PC configuration used |
| SPO (Smart Persistence Oscilloscope) |
| Duration of Persistence |
100ms, 200ms, 500ms, 1s, 2s, 5s, 10s and infinite |
| Performance |
Acquisition rate 50 kwaveforms/s/channel,
no. of samples acquired: 19MS/s/channel |
| MEASUREMENT PROCESSING |
| FFT Analyzer/ MATH Functions |
FFT (calculation over 2,048 points), + , - ,
x , / – "Made-to-measure" function editor |
| Manual Cursors |
dv, dt, 1/dt, phase – cursors linked or unlinked to trace |
| Automatic Measurements |
dv, dt, 1/dt, phase – cursors linked or unlinked to trace |
| RECORDER MODE |
| Duration/Sampling |
Duration: 2s to 31 days / Sampling interval: 40µs to 53.57s |
| HARMONIC ANALYZER |
| Analysis Range |
Fundamental from 40Hz to 1kHz + 31 orders on 1 to 4 channels |
| Processing |
Total RMS value, THD and selected order (%F, phase, frequency, Vrms) |
| GENERAL SPECIFICATIONS |
| Configurations |
Memories Unlimited - “.CFG” file size approx. 1kB |
| Ethernet Network Printing Standard |
11 black and white or color drivers - IBM Proprinter, Epson ESC/P, Canon HP PCL, Seiko DPU411 |
| RS-232 or Centronics Options |
Postscript Image files - “.BMP” 10kB, “.GIF” approx. 5kB (storage in memory transfer by RS-232 or Ethernet) |
| Communication |
Local via Ethernet 10 MB or RS 232 (option) - Remote via 10 MB Ethernet and web server
“Sx-Metro” application software for PC (option) |
| Power Source |
9.6V/3.8 A/h battery pack - Approx. 4h between charges - Adjustable power-saving switching |
| Multi-voltage |
98-254V / 47-63Hz - Fast charge in 2 hours (oscilloscope off) |
| Dimensions |
10.25 x 7.25 x 2" (261 x 185 x 53mm) |
| Weight |
4.2 lbs (1.9kg with batteries) |